How to shutdown alarm voice for metro 1000

3

Switch alarm button from “ALMON�?to “ALMCUT�?Enterprise Network

Other related questions:
Command for setting alarm output of Metro 1000
The command for setting alarm output is as follows: :cfg-set-swoutmode:Bid, SwitchId, Switchmode, Example: cfg-set-swoutused:14,1,enable\\Indicates that alarm output is enabled.

Indication of the red alarm indicator on the Metro 1000
If the alarm indicator on the Metro 1000 is steady red, a critical alarm is generated. You need to check it on the NMS.

Whether fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal
Yes, fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal.

METRO 1000 SLOT capacity
Slot 1,slot 2,slot 3 provide 1.25G capcity respective ,slot 4 provide 622M

Clock output interface of Metro 1000
V3 equipment: The clock interface is SYNC 1/2, which is a two-channel 120-ohm external clock input/output interface. V2 equipment: The clock interfaces are the IN I/OUT I and IN II/OUT II interfaces on the SCB board. The interface rate can be set to 2 Mbit/s or 2 MHz.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top