Does the web function is enabled on an AR router by default

46

The web function is enabled on an AR router by default.

Other related questions:
How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

Whether web login is enabled by default for the USG6000 series
By default, HTTP- and HTTPS-based web services are enabled. The device allows administrators to log in to the web UI through HTTP and HTTPS.

On which interface is the default management IP address of an AR router configured
From specified versions on, the router is configured with a management IP address in factory setting and the web NMS is enabled.

Is multicast enabled on the AR router by default
By default, the multicast function of the AR router is disabled.

Configure attack defense on an AR router
Attack defense mainly defends the CPU against attack packets to ensure that the server can normally run in case of an attack. Attack defense configuration is composed of the following parts: enabling attack defense, (optional) configuring flooding defense parameters, super-large ICMP packet defense parameters, and scan attack defense parameters, and checking configuration result. By default, no type of attack defense is enabled. For details about how to configure attack defense of AR series routers using command lines and through the web NMS, see the URL: AR router configuration attack defense .

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top