How to adjust the timeout duration on an AR router through the web NMS

7

How to adjust the timeout duration on an AR router through the web NMS:
1. Choose System Management > System Configuration > Service Management.
In web service timeout , set the timeout duration.

Other related questions:
How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

Method of creating a VLAN through the web NMS on an AR router
The web NMS of the AR series routers does not support VLAN creation or adding of interfaces to a created VLAN. You can create a VLANIF interface, and add the interface to the VLAN. 1. Choose LAN Access > LAN >VLAN Interface to enter the VLAN interface configuration page. 2. In the VLAN Interface List area, click Create. 3. On the Create VLAN Inter page, select parameters or enter values according to requirements to configure a VLAN interface. On the NMS page, only interfaces of the access and trunk types can be configured. Hybrid type interfaces cannot be configured. Use command lines to create a VLAN. In the system view, run the vlan command or the vlan batch command.

How to upgrade the system software through the web NMS on an AR router
To upgrade the system software through the web NMS on an AR router, do as follows: 1. Choose System Management > Upgrade and Maintenance > System Software. 2. Click Browse, and select the system software to be uploaded. 3. Click Load to upload the system software to a device, and specify the software as the system software of the device during next-time startup. Restart the device to validate the configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top