Incomplete web page menu on an AR router

16

The problem is caused due to insufficient user permissions:
The default level of web users is 0, which indicates that the users can only use network diagnosis commands (ping and Tracert) or query basic information. You can improve user permissions using command lines or through the web NMS.
1. Command lines: Configure a user level in the AAA view.
[Huawei] aaa
[Huawei-aaa] local-user huawei password irreversible-cipher Huawei@123
[Huawei-aaa] local-user huawei service-type http //An account with the login mode containing the HTTP type has the web login permission.
[Huawei-aaa] local-user huawei privilege level 15 //Change the user permission to the administrator level.
[Huawei-aaa] quit
[Huawei] quit
In the user view, run the save command to save the configuration, and re-log in to a web page for verification.
2. Web NMS: Log in to the web NMS using the super administrator account, and choose Web-based Configuration > User Management > User Management to change the user permission.

Other related questions:
Menu structure of endpoint web pages and remote control UIs
After knowing the menu structure on the web interface and remote control UI, you can quickly find the entry to your desired function. - For details about the menu structure on the web interface and remote control UI of the TE30, see chapter 3 "Menu Structure of the Web Interface" and chapter A "Menu Structure of the Remote Controlled UI" in the HUAWEI TE30 Videoconferencing Endpoint V100R001C10SPC600 Administrator Guide. - For details about the menu structure on the web interface and remote control UI of the TE40/TE50/TE60, see chapter 3 "Menu Structure of the Web Interface" and chapter B "Menu Structure of the Remote Controlled UI" in the HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint V100R001C10SPC300 Administrator Guide. - For details about the menu structure on the web interface of HUAWEI 9000 HD videoconferencing endpoints, see chapter E "Menus" in the HUAWEI 9000 HD Videoconferencing Endpoint V100R011C03 Administrator Guide. - For details about the menu structure on the remote control UI of ViewPoint 8000 series endpoints, see section A.3 "Menu Structure" in the ViewPoint Group Video Terminal V600R481C02 Administrator Guide.

How to upgrade the system software through the web NMS on an AR router
To upgrade the system software through the web NMS on an AR router, do as follows: 1. Choose System Management > Upgrade and Maintenance > System Software. 2. Click Browse, and select the system software to be uploaded. 3. Click Load to upload the system software to a device, and specify the software as the system software of the device during next-time startup. Restart the device to validate the configuration.

When the AR router is used as the web server, the web platform page is displayed slowly
The possible causes and solutions are as follows: 1. A problem occurs on the local PC. Solution: Clear historical records and cache data on the local PC; upgrade the browser to the latest version or change the browser; upgrade flash player plug-in. 2. System software problem. Solution: Upgrade the router software. 3. The web access mode is incorrect. Solution: Change the web access mode to HTTPS.

How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top