How long can I re-log in to the web system of an AR after the password is locked

26

The default password unlocking time is 5 minutes.

Other related questions:
What can I do if the web login password of an AR is locked
By default, you can re-log in to the web system 5 minutes later after the account is unlocked automatically. You can also log in to an AR through the CLI and run the local-user < user-name > state active command to unlock the account.

How to solve the AR routers Web password is locked.
By default, the locked for 5 minutes after the automatic unlock after can log in to the system again. You can also use the CLI mode to log in to the device, in the aaa view, use the command local-user < user-name > state active to unlock the account.

How to log in to the web self-service system of the U1900 series unified gateway
Internet Explorer 7 or a later version with ActiveX and JavaScript supported is required for the web self-service system. To log in to the web self-service system of the U1900 series unified gateway, perform the following steps: 1. Open a web browser and enter the URL of the gateway (https://Gateway IP address) in the address box. Note: For U1911/U1960/U1980/U1981 in dual-network-port or triple-network-port mode, you can log in to the web self-service system through network port 0, 1, or 2 on the SCU/SMCU board. 2. Enter the user name and password, and click Login. Note: The user name is the user number. The default password for V200R003 is Change_Me and for V100R001C20 is huawei123. You can click Change password in the upper right corner of the web page to change the password after login. To ensure account security, change the password periodically and ensure that the password meets complexity requirements. It is recommended that you download and install the CA root certificate to improve your login speed.

How long is the timeout interval of the AR router after users log in
By default, the timeout interval of the AR router is 5 minutes. The AR router supports the timeout interval. The procedure is as follows: 1. Run the idle-timeout minutes [ seconds ] command in the user view to set the timeout interval of disconnection. 2. If AAA authentication is configured, you need to run the local-user < user-name > idle-timeout < minutes > [ < seconds > ] command in the AAA view after running the idle-timeout command to enable disconnection of idle users. After the configuration is complete, the system can disconnect the user from the VTY interface when the timeout interval expires. You are advised to set the timeout interval to 10-15 minutes in the user interface. Note: To disable the disconnection function in the user interface, run the idle-timeout 0 command. If the idle disconnection function is not enabled for VTY users, other users may fail to use idle connections.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top