Port working modes supported by an EMS2 board on an OSN 3500

4

Port working modes supported by an EMS2 board on an OSN 3500:
1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex
2. GE optical ports: auto-negotiation and 1000M full-duplex
3. FE electrical ports: auto-negotiation, 100M full-duplex, 100M half-duplex, 10M full-duplex, and 10M half-duplex (An EMS2 board supports FE electrical ports when it works with an ETF8 board.)
4. FE optical ports: 100M full-duplex (An EMS2 board supports FE optical ports when it works with an EFF8 board.)

Other related questions:
Protection modes supported by an EMS2 board on an OSN 3500
Protection modes supported by an EMS2 board on an OSN 3500: 1. TPS: not supported 2. BPS: not supported 3. PPS: not supported 4. DLAG: not supported 5. LAG: supports manual link aggregation and load sharing, and complies with the IEEE 802.3ad and IEEE 802.1AX standards. 6. LCAS: supported. LCAS can increase or decrease bandwidth dynamically for service protection, in compliance with the ITU-T G.7042 standard. 7. LPT: supports point-to-point LPT and point-to-multipoint LPT, and complies with the ITU-T G.7042 standard. 8. STP/RSTP: supports broadcast packet suppression and RSTP, and complies with the IEEE 802.1w standard. 9. MSTP: not supported

Reset modes supported by an EMS2 board on an OSN 3500
Reset modes supported by an EMS2 board on an OSN 3500: 1. Warm reset: supported 2. Cold reset: supported

Port working modes supported by an EGS2 board on an OSN 3500
Port working modes supported by an EGS2 board on an OSN 3500: 1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex (Only N3EGS2 boards support GE electrical ports.) 2. GE optical ports: auto-negotiation and 1000M full-duplex

Port working modes supported by an EFT8 board on an OSN 3500
Port working modes supported by an EFT8 board on an OSN 3500: 100M full-duplex, 10M full-duplex, and auto-negotiation

Interface boards that an EMS2 board on an OSN 3500 can work with
An EMS2 board on an OSN 3500 can work with the following types of interface boards: 1. Works with two ETF8 boards to receive and transmit FE signals over 16 electrical ports. 2. Works with two EFF8 boards to receive and transmit FE signals over 16 optical ports. 3. Works with an ETF8 board to receive and transmit FE signals over 8 electrical ports, or works with an EFF8 board to receive and transmit FE signals over 8 optical ports.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top