Reset modes supported by an EGS2 board on an OSN 3500

36

Reset modes supported by an EGS2 board on an OSN 3500:
1. Warm reset: An N2EGS2 board supports a warm reset, which interrupts services. An N3EGS2 board supports a warm reset, which does not affect services.After an N2EGS2 board is replaced with an N3EGS2 board by using the board version replacement function, a warm reset is supported, which does not affect services.
2. Cold reset: supported. A cold reset interrupts services.

Other related questions:
Port working modes supported by an EGS2 board on an OSN 3500
Port working modes supported by an EGS2 board on an OSN 3500: 1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex (Only N3EGS2 boards support GE electrical ports.) 2. GE optical ports: auto-negotiation and 1000M full-duplex

Protection modes supported by an EGS2 board on an OSN 3500
Protection modes supported by an EGS2 board on an OSN 3500: 1. TPS: not supported 2. BPS: supported by N3EGS2 boards 3. PPS: not supported 4. DLAG: not supported 5. LAG: supports manual link aggregation and load sharing, and complies with the IEEE 802.3ad and IEEE 802.1AX standards. 6. LCAS: supported. LCAS can increase or decrease bandwidth dynamically for service protection, in compliance with the ITU-T G.7042 standard. 7. LPT: N2EGS2 boards support point-to-point LPT and N3EGS2 boards support point-to-point LPT and point-to-multipoint LPT, in compliance with the ITU-T G.7042 standard. 8. STP/RSTP: supports broadcast packet suppression and RSTP, and complies with the IEEE 802.1w standard. 9. MSTP: not supported

Reset modes supported by an EGS4 board on an OSN 3500
Reset modes supported by an EGS4 board on an OSN 3500: 1. Warm reset: supported. 2. Cold reset: supported. A cold reset interrupts services.

Reset modes supported by an EMS2 board on an OSN 3500
Reset modes supported by an EMS2 board on an OSN 3500: 1. Warm reset: supported 2. Cold reset: supported

Service types supported by an EGS2 board on an OSN 3500
Service types supported by an EGS2 board on an OSN 3500: 1. EPL services: port-based transparent transmission 2. EVPL services: Port-shared EVPL services VCTRUNK-shared EVPL services VLAN tag–based isolation MPLS label–based isolation QinQ tag–based isolation A maximum of 4096 link services 3. EPLAN services: A maximum of 2000 blacklisted MAC address, 2000 static MAC addresses, and 2000 shared MAC addresses (The blacklist of an N3EGS2 board supports only destination MAC address verification but does not support source MAC address verification.) Source MAC address self-learning (the MAC address table is 16 KB), and setting and query of the MAC address aging time Configurations of static MAC routes A maximum of two VBs, with a maximum of 30 logical ports per VB EPLAN services based on IEEE 802.1d MAC Bridge (N3EGS2 only) 4. EVPLAN services: Data isolation based on VB+VLAN A maximum of 4096 VLAN services that can be configured EVPLAN services based on IEEE 802.1q Virtual Bridge

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top