Bandwidth and VCTRUNK specifications of an EGS2 board on an OSN 3500

19

Bandwidth of an EGS2 board on an OSN 3500: 2.5 Gbit/s, supporting slot bandwidth auto-adaptation
48 x VC-3 or 252 x VC-12 + 36 x VC-3

Other related questions:
Bandwidth and VCTRUNK specifications of an EGS4 board on an OSN 3500
Bandwidth of an EGS4 board on an OSN 3500: 2.5 Gbit/s 1. N1EGS4 board:16 x VC-4, 48 x VC-3, or 1008 x VC-12 2. N3EGS4 or N4EGS4 board: 16 x VC-4, 48 x VC-3, or 504 x VC-12

Bandwidth and VCTRUNK specifications of an EMS2 board on an OSN 3500
Bandwidth of an EMS2 board on an OSN 3500: 2.5 Gbit/s 8 x VC-4, 24 x VC-3, or 63 x VC-12

Types of ports on an EGS2 board of an OSN 3500
Types of ports on an EGS2 board of an OSN 3500: 1. Each EGS2 board supports 1000Base-SX/LX/ZX/VX Ethernet optical ports, which support auto-negotiation and comply with the IEEE 802.3z standard. An EGS2 board uses hot-pluggable SFP optical ports, which support a maximum transmission distance of 550 m in case of multimode fibers and a maximum transmission distance of 10 km in case of single-mode fibers. You can also use an optical module that supports a maximum transmission distance of 40 km or 80 km as required. 2. An N3EGS2 board also supports 1000BASE-T RJ45 Ethernet electrical ports, which support 10M, 100M, or 1000M auto-negotiation. The board uses hot-pluggable SFP electrical ports, which support a maximum transmission distance of 100 m.

Reset modes supported by an EGS2 board on an OSN 3500
Reset modes supported by an EGS2 board on an OSN 3500: 1. Warm reset: An N2EGS2 board supports a warm reset, which interrupts services. An N3EGS2 board supports a warm reset, which does not affect services.After an N2EGS2 board is replaced with an N3EGS2 board by using the board version replacement function, a warm reset is supported, which does not affect services. 2. Cold reset: supported. A cold reset interrupts services.

Service types supported by an EGS2 board on an OSN 3500
Service types supported by an EGS2 board on an OSN 3500: 1. EPL services: port-based transparent transmission 2. EVPL services: Port-shared EVPL services VCTRUNK-shared EVPL services VLAN tag–based isolation MPLS label–based isolation QinQ tag–based isolation A maximum of 4096 link services 3. EPLAN services: A maximum of 2000 blacklisted MAC address, 2000 static MAC addresses, and 2000 shared MAC addresses (The blacklist of an N3EGS2 board supports only destination MAC address verification but does not support source MAC address verification.) Source MAC address self-learning (the MAC address table is 16 KB), and setting and query of the MAC address aging time Configurations of static MAC routes A maximum of two VBs, with a maximum of 30 logical ports per VB EPLAN services based on IEEE 802.1d MAC Bridge (N3EGS2 only) 4. EVPLAN services: Data isolation based on VB+VLAN A maximum of 4096 VLAN services that can be configured EVPLAN services based on IEEE 802.1q Virtual Bridge

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top