Port working modes supported by an EGS2 board on an OSN 3500

57

Port working modes supported by an EGS2 board on an OSN 3500:
1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex (Only N3EGS2 boards support GE electrical ports.)
2. GE optical ports: auto-negotiation and 1000M full-duplex

Other related questions:
Reset modes supported by an EGS2 board on an OSN 3500
Reset modes supported by an EGS2 board on an OSN 3500: 1. Warm reset: An N2EGS2 board supports a warm reset, which interrupts services. An N3EGS2 board supports a warm reset, which does not affect services.After an N2EGS2 board is replaced with an N3EGS2 board by using the board version replacement function, a warm reset is supported, which does not affect services. 2. Cold reset: supported. A cold reset interrupts services.

Types of ports on an EGS2 board of an OSN 3500
Types of ports on an EGS2 board of an OSN 3500: 1. Each EGS2 board supports 1000Base-SX/LX/ZX/VX Ethernet optical ports, which support auto-negotiation and comply with the IEEE 802.3z standard. An EGS2 board uses hot-pluggable SFP optical ports, which support a maximum transmission distance of 550 m in case of multimode fibers and a maximum transmission distance of 10 km in case of single-mode fibers. You can also use an optical module that supports a maximum transmission distance of 40 km or 80 km as required. 2. An N3EGS2 board also supports 1000BASE-T RJ45 Ethernet electrical ports, which support 10M, 100M, or 1000M auto-negotiation. The board uses hot-pluggable SFP electrical ports, which support a maximum transmission distance of 100 m.

Protection modes supported by an EGS2 board on an OSN 3500
Protection modes supported by an EGS2 board on an OSN 3500: 1. TPS: not supported 2. BPS: supported by N3EGS2 boards 3. PPS: not supported 4. DLAG: not supported 5. LAG: supports manual link aggregation and load sharing, and complies with the IEEE 802.3ad and IEEE 802.1AX standards. 6. LCAS: supported. LCAS can increase or decrease bandwidth dynamically for service protection, in compliance with the ITU-T G.7042 standard. 7. LPT: N2EGS2 boards support point-to-point LPT and N3EGS2 boards support point-to-point LPT and point-to-multipoint LPT, in compliance with the ITU-T G.7042 standard. 8. STP/RSTP: supports broadcast packet suppression and RSTP, and complies with the IEEE 802.1w standard. 9. MSTP: not supported

Port working modes supported by an EMS2 board on an OSN 3500
Port working modes supported by an EMS2 board on an OSN 3500: 1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex 2. GE optical ports: auto-negotiation and 1000M full-duplex 3. FE electrical ports: auto-negotiation, 100M full-duplex, 100M half-duplex, 10M full-duplex, and 10M half-duplex (An EMS2 board supports FE electrical ports when it works with an ETF8 board.) 4. FE optical ports: 100M full-duplex (An EMS2 board supports FE optical ports when it works with an EFF8 board.)

Port working modes supported by an EFT8 board on an OSN 3500
Port working modes supported by an EFT8 board on an OSN 3500: 100M full-duplex, 10M full-duplex, and auto-negotiation

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top