Reset modes supported by an EGS4 board on an OSN 3500

1. Encapsulation formats supported by an EGS4 board on an OSN 3500: a. HDLC: supported b. LAPS: supported c. GFP-F: supported 2. Ethernet data frame formats supported by an EGS4 board on an OSN 3500: IEEE 802.3, Ethernet II, and IEEE 802.1 q/p

Bandwidth of an EGS4 board on an OSN 3500: 2.5 Gbit/s 1. N1EGS4 board:16 x VC-4, 48 x VC-3, or 1008 x VC-12 2. N3EGS4 or N4EGS4 board: 16 x VC-4, 48 x VC-3, or 504 x VC-12

Protection modes supported by an EGS4 board on an OSN 3500: 1. TPS: not supported 2. BPS: supported 3. PPS: supported. For EGS4 boards with GE electrical ports, PPS cannot be configured. 4. DLAG: supported 5. LAG: supports manual and static link aggregation. 6. LCAS: supported. LCAS can increase or decrease bandwidth dynamically for service protection, in compliance with the ITU-T G.7042 standard. 7. LPT: supports point-to-point LPT and point-to-multipoint LPT, and complies with the ITU-T G.7042 standard. 8. STP/RSTP: supported, in compliance with the IEEE 802.1w standard. 9: MSTP: supported by N1EGS4 boards 10. Data DNI protection: supported by N4EGS4 boards

Reset modes supported by an EGS2 board on an OSN 3500: 1. Warm reset: An N2EGS2 board supports a warm reset, which interrupts services. An N3EGS2 board supports a warm reset, which does not affect services.After an N2EGS2 board is replaced with an N3EGS2 board by using the board version replacement function, a warm reset is supported, which does not affect services. 2. Cold reset: supported. A cold reset interrupts services.

Reset modes supported by an EMS2 board on an OSN 3500: 1. Warm reset: supported 2. Cold reset: supported