Bandwidth and VCTRUNK specifications of an EGS4 board on an OSN 3500

Protection modes supported by an EGS4 board on an OSN 3500: 1. TPS: not supported 2. BPS: supported 3. PPS: supported. For EGS4 boards with GE electrical ports, PPS cannot be configured. 4. DLAG: supported 5. LAG: supports manual and static link aggregation. 6. LCAS: supported. LCAS can increase or decrease bandwidth dynamically for service protection, in compliance with the ITU-T G.7042 standard. 7. LPT: supports point-to-point LPT and point-to-multipoint LPT, and complies with the ITU-T G.7042 standard. 8. STP/RSTP: supported, in compliance with the IEEE 802.1w standard. 9: MSTP: supported by N1EGS4 boards 10. Data DNI protection: supported by N4EGS4 boards

Reset modes supported by an EGS4 board on an OSN 3500: 1. Warm reset: supported. 2. Cold reset: supported. A cold reset interrupts services.

Bandwidth of an EGS2 board on an OSN 3500: 2.5 Gbit/s, supporting slot bandwidth auto-adaptation 48 x VC-3 or 252 x VC-12 + 36 x VC-3

Bandwidth of an EMS2 board on an OSN 3500: 2.5 Gbit/s 8 x VC-4, 24 x VC-3, or 63 x VC-12

Osn35003500 equipment EFT8A veneer bandwidth: 622 mbit/s, 12 XVC - 3 or 63 XVC - 12 + 9 XVC - 3.