Which slot can install amplifier card on OSN3500

6

1. N1BA2 card put slot :
200Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?120Gbit/s cross-connection capacity:slot 1�?�?1�?7
80Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?40Gbit/s cross-connection capacity:slot 1�?�?1�?6
1. N1BPA N2BPA card put slot :
200Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?120Gbit/s cross-connection capacity::slot 1�?�?1�?7

Other related questions:
Which is pair slot of OSN3500
40Gbit/s cross-connection card paired slot number : slot 3,slot 16 slot 4,slot 15 slot 5,slot 14 slot 6,slot 13 slot 7,slot 12 slot 8,slot 11 80Gbit/s or 200Gbit/sor 120Gbit/s cross-connection card paired slot number : slot 2,slot 17 slot 3,slot 16 slot 4,slot 15 slot 5,slot 14 slot 6,slot 13 slot 7,slot 12 slot 8,slot 11

Whether front cards and rear stack cards can be used together on S series fixed switches
S5700-EI, S5710-LI, and S5700-C-SI series fixed switches have front and rear card slots. Font card slots can have 2-port or 4-port service interface cards installed. Rear card slots can have stack cards or extended channel cards installed. The rules are as follows: -- A 4-port ES5D000G4S01 or ES5D00G4SA01 GE front card and a 4-port ES5D000X4S01 10GE front card must be used with an ES5D00ETPB00 rear extended channel card; otherwise, only two ports on the 4-port front card can work. -- If an ES5D000G4S01 or ES5D00G4SA01 front card is used with an ES5D00ETPC00 rear stack card on an S5700-EI, S5700-SI, or S5710-C-LI switch, only the first two ports on the front card can work when the switch is working normally. If the ES5D000X4S01 front card is used, only ports 1 and 3 are available. --The ES5D00ETPB00 card used with the ES5D000X4S01 front card must have a PCB of version C. -- The S5700-EI switch that uses the ES5D000X4S01 front card must have a PCB of version B or later (version C on S5700-52C-EI). You can run the display version command to check the PCB version of a switch. For details about cards, see the Hardware Description. For the hardware description of S5700 switches, see S5700 Hardware Description. For the hardware description of S6700 switches, see S6700 Hardware Description.

Which work mode support by OSN3500 EGS4 card
GE eletrical port :support auto negotiation�?1000M full duplex,100M full duplex,10M fullduplex GE optical port: suppport auto negotiation,1000M full duplex

Which reset type support by OSN3500 EMS4 card
Cold reset and softreset

The different of OSN amplifier card
1.BA2 : increase line card transmit power to +13dBm�?15dBm or +15dBm�?18dBm, distance reach to 120km or 130km 2.BPA:increase line card transmit power to +13dBm�?15dBm or +15dBm�?17dBm,distance reach to 120km or 130km Provide PA module,perform previous booster ,power gain 22dB�?5dB(N1BPA),22dB�?3dB(N2BPA�? Enterprise Network,Enterprise Transmission,MSTP,What dose means 2 COA concatenation monitor,In order to communicate with controller

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top