OptiX OSN 1500B slot connection capacity

14

If OptiX OSN 1500 a configuration on the master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is:
When used as a big plate, slot 12 and slot 13 access capacity of 2.5 Gbit/s.
When used as a small plate, four small plate a access capacity of 1.25 Gbit/s.
If OptiX OSN 1500 a configuration on the master cross board for R1CXL and veneer R2CXL series, are:
When used as a big plate, slot 12 access capacity of 1.875 Gbit/s, slot 13 access capacity of 1.25 Gbit/s.
When used as a small plate, only slot 2, put single slot 12 and 13 can plug slot.Slot 2 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s.
If OptiX OSN 1500 b on the configuration of master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is:
When used as a big plate, slot 11, 12 and slot slot 13 access capacity of 2.5 Gbit/s.
When used as a small plate, slot 1 ~ 3 and slot 11 ~ 13 access capacity of 1.25 Gbit/s.
Description:
When using Q5CXL series veneer, in Lao tze rack, slot 6 ~ 9 access capacity are 622 mbit/s;In the new child frame, slot 6 ~ 9 access capacity of 1.25 Gbit/s.
If OptiX OSN 1500 b on the configuration of master cross board for R1CXL and veneer R2CXL series, are:
When used as a big plate, slot 11 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s.
When used as a small plate, slot only 11 ~ 13 can plug put veneer, access capacity and as a big board when using the same.

Other related questions:
Cross-connect capacity of each slot in an OptiX OSN 6800 subrack
If the TN12XCS board is used, each of the IU1, IU4, IU11, and IU14 slots supports a maximum cross-connect capacity of 40 Gbit/s. Each of the other service slots supports a maximum cross-connect capacity of 20 Gbit/s. If the TN11XCS board is used, each of all service slots supports a maximum cross-connect capacity of 20 Gbit/s. When IU17 is used as a service slot, no service grooming is supported.

Service capacity of each slot in an OptiX OSN 6800 subrack equipped with the NQ2 board
If the TN12XCS board is used, the NQ2 board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14; the NQ2 board supports a service capacity of 20 Gbit/s when it is installed in any of other slots and only optical ports IN1/OUT1 and IN2/OUT2 of the board are available. If the TN11XCS board is used, only optical ports IN1/OUT1 and IN2/OUT2 of the NQ2 board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board.

The cross capacity of OSN1500
1. Q2 / Q3CXL series single board: A. high order cross ability: 20 gbit/s (128 x 128 VC - 4) B. low cross ability: 20 gbit/s (VC (128 x 128-4), equivalent to (VC 384 x 384-3) or (8064 x 8064-12) of VC) C. list frame access ability: 15 gbit/s (96 x 96 VC - 4) 2. Q5CXL series single board: A. high order cross ability: the new back: 60 gbit/s (384 x 384 VC - 4) old back: 20 gbit/s (128 x 128 VC - 4) B. low cross ability: 20 gbit/s (128 x 128 VC - 4), equivalent to (VC 384 x 384-3) or (8064 x 8064 VC - 12) C. list frame access ability, the new back: 17.5 Gbit/s (112 x 112 VC - 4) old back: 15 Gbit/s (96 x 96 VC - 4) 3. R1 / R2CXL series single board: A. high order cross ability: 15 gbit/s (96 x 96 VC - 4) B. low cross capacity: 5 gbit/s (32 x 32 VC - 4), equivalent to (VC 96 x 96-3) or (2016 x 2016 VC - 12) C. list frame access ability: 10 gbit/s (64 x 64 VC - 4)

Service capacity of each slot in an OptiX OSN 6800 subrack equipped with the TQX board
If the TN12XCS board is used, the TQX board supports a service capacity of 40 Gbit/s when it is installed in slot 1, 4, 11, or 14; the TQX board supports a service capacity of 20 Gbit/s when it is installed in any of other slots and only optical ports RX1/TX1 and RX2/TX2 of the board are available. If the TN11XCS board is used, only optical ports RX1/TX1 and RX2/TX2 of the TQX board are available and therefore the board supports a service capacity of only 20 Gbit/s regardless of the slot housing the board.

Capacity of Optix OSN2500 cross-connection
Q2/Q3CXL serial card : High order capacity:20Gbit/s�?28×128 VC-4�?Low order capacity:20Gbit/s �?28×128 VC-4)or �?84×384 VC-3)or�?064×8064 VC-12�?Sigal subrack access capacity :18.75Gbit/s�?20×120 VC-4�?Q5CXL serial card : High order capacity: new mother board :60Gbit/s�?84×384 VC-4) old mother board�?0Gbit/s�?28×128 VC-4�?Low order capacity:�?0Gbit/s�?28×128 VC-4)or�?84×384 VC-3)or�?064×8064 VC-12�?Sigal subrack access capacity : new mother board :22.5Gbit/s�?44 ×144 VC-4�?old mother board�?8.75Gbit/s�?20×120 VC-4�? Enterprise Network,Enterprise Transmission,MSTP,Capacity of Optix OSN1500 cross-connection,Q2/Q3CXL serial card

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top