How to disable the web function on an AR router

54

How to disable the web function on an AR router?
For routers that support web NMS, disable the HTTP server on the routers to disable the web function. Specific method is as follows:
[Huawei] undo http server enable //Disable the HTTP service.
[Huawei] undo http secure-server enable //Disable the HTTPS service.

Other related questions:
How to disable the web verification code function on an AR router
All V200R003 models support verification codes. From V200R005 on, the web NMS does not support verification codes. On V200R003, a verification code is needed for web login, and this function is always enabled and cannot be disabled.

How to disable Telnet in web mode on an AR router
The method of disabling Telnet in web mode is as follows: 1. Choose System Management > System Configuration > Service Management. 2. Select Disabled of Telnet Service to disable the Telnet service.

How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

Enable the firewall functions on an AR router
All configured firewall functions take effect after the firewall functions are enabled in interzones. If an interzone contains the Local zone, to enable the firewall functions to take effect in this interzone, run the ip soft-forward enhance enable command in the system view to enable the IP address enhanced forwarding function of the router. Run the system-view command to access the system view. Run the firewall interzone zone-name1 zone-name2 command to access the interzone view. The zone-name1 and zone-name2 have been created by running the firewall zone command. Run the firewall enable command to enable the firewall functions. By default, the firewall functions of the interzone are not enabled. Run the undo firewall enable command to disable the firewall functions of the interzone. Run the display firewall interzone [ zone-name1 zone-name2 ] command to query information about the interzone.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top