Got it

Capacity of Optix OSN2500 cross-connection

201

Q2/Q3CXL serial card :
High order capacity:20Gbit/s�?28×128 VC-4�?Low order capacity:20Gbit/s �?28×128 VC-4)or �?84×384 VC-3)or�?064×8064 VC-12�?Sigal subrack access capacity :18.75Gbit/s�?20×120 VC-4�?Q5CXL serial card :
High order capacity:
new mother board :60Gbit/s�?84×384 VC-4)
old mother board�?0Gbit/s�?28×128 VC-4�?Low order capacity:�?0Gbit/s�?28×128 VC-4)or�?84×384 VC-3)or�?064×8064 VC-12�?Sigal subrack access capacity :
new mother board :22.5Gbit/s�?44 ×144 VC-4�?old mother board�?8.75Gbit/s�?20×120 VC-4�?
Enterprise Network,Enterprise Transmission,MSTP,Capacity of Optix OSN1500 cross-connection,Q2/Q3CXL serial card

Other related questions:
Capacity of OSN3500 cross connection
GXCSA: high-order capacity:40Gbit/s GXCSA:high-order capacity:5Gbit/s GXCSA: access capacity:35Gbit/s EXCSA: high-order capacity:80Gbit/s EXCSA:high-order capacity:5Gbit/s EXCSA: access capacity:75Gbit/s UXCSA: high-order capacity:80Gbit/s UXCSA:high-order capacity:20Gbit/s UXCSA: access capacity:58.75Gbit/s SXCSA: high-order capacity:200Gbit/s SXCSA:high-order capacity:20Gbit/s SXCSA: access capacity:155Gbit/s SXCSB: high-order capacity:200Gbit/s SXCSB:high-order capacity:20Gbit/s SXCSB: access capacity:156bit/s
OptiX OSN2500 can cross capacity
Q2 / Q3CXL series veneer High order cross ability: 20 gbit/s (128 x 128 VC - 4) Low cross ability: 20 gbit/s (128 x 128 VC - 4) equivalent to VC (384 x 384-3) or (8064 x 8064 VC - 12) List frame access ability: 18.75 Gbit/s (120 x 120 VC - 4) Q5CXL series single board: High order cross ability: the new back: 60 gbit/s (384 x 384 VC - 4) old back: 20 gbit/s (128 x 128 VC - 4) Low cross ability: 20 gbit/s (128 x 128 VC - 4), equivalent to (VC 384 x 384-3) or (8064 x 8064 VC - 12) Slip and frame access ability, the new back: 22.5 Gbit/s (144 x 144 VC - 4) old back: 18.75 Gbit/s (120 x 120 VC - 4)
Cross-connect capacity of each slot in an OptiX OSN 6800 subrack
If the TN12XCS board is used, each of the IU1, IU4, IU11, and IU14 slots supports a maximum cross-connect capacity of 40 Gbit/s. Each of the other service slots supports a maximum cross-connect capacity of 20 Gbit/s. If the TN11XCS board is used, each of all service slots supports a maximum cross-connect capacity of 20 Gbit/s. When IU17 is used as a service slot, no service grooming is supported.
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.