Which card name of OSN1500 slot10

3

AUX card put in slot 10

Other related questions:
Which protocol of 100M ethernet port on OSN1500 aux card
10M/100M auto adaptable interface

Tributary card and relevant interface card of OSN1500
PL1: insert in osn1500A or osn1500B subrack. When cross connection capacity is 15Gbit/s ,you can put slot 6-8 When cross connection capacity is 20Gbit/s or 60Gbit/s ,you can put slot 6-9 PD1:Under osn 1500A, connect with interface card L75S or L12S ; Under osn1500B ,cross connection capacity is 15Gbit/s ,PD1 work under slot11-slot13,slot6-slot8; cross connection capacity is 20Gbit/s or 60G ,PD1 work under slot1-slot3,slot11-slot13,slot6-slot8;

WhetHer controller card is compatible of OSN1500 and OSN2500
OptiX OSN 2500,OptiX OSN 1500B和OptiX OSN 1500A support:Q2CXL1,Q3CXL1,Q2CXL4,Q3CXL4,Q2CXL16,Q3CXL16,Q5CXLLN,Q5CXLQ41

The cross capacity of OSN1500
1. Q2 / Q3CXL series single board: A. high order cross ability: 20 gbit/s (128 x 128 VC - 4) B. low cross ability: 20 gbit/s (VC (128 x 128-4), equivalent to (VC 384 x 384-3) or (8064 x 8064-12) of VC) C. list frame access ability: 15 gbit/s (96 x 96 VC - 4) 2. Q5CXL series single board: A. high order cross ability: the new back: 60 gbit/s (384 x 384 VC - 4) old back: 20 gbit/s (128 x 128 VC - 4) B. low cross ability: 20 gbit/s (128 x 128 VC - 4), equivalent to (VC 384 x 384-3) or (8064 x 8064 VC - 12) C. list frame access ability, the new back: 17.5 Gbit/s (112 x 112 VC - 4) old back: 15 Gbit/s (96 x 96 VC - 4) 3. R1 / R2CXL series single board: A. high order cross ability: 15 gbit/s (96 x 96 VC - 4) B. low cross capacity: 5 gbit/s (32 x 32 VC - 4), equivalent to (VC 96 x 96-3) or (2016 x 2016 VC - 12) C. list frame access ability: 10 gbit/s (64 x 64 VC - 4)

Function and feature of OSN1500 AUX
1. manage interface : provide OAN/F&f interface ,support x.25 protocol. Provide 10M/100M NMS interface . 2 clock interface : provide 2 BITS input interfaces and 2 output interfaces ,resistance 120 3. alarm switch interface : provide 3 alarm input and 1 alamr output interface 4. internal communication: implemetation communication between boards 5. power backup and check : observer 2 seperate -48V power ,also monitor over-voltage (-72v) and low -voltage (-38.4)

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top