Slot capacity of metro3000

1

If S16 card put in slot4 ,slot1-slot3 don't accept any card
If SD4 card put in slot9 ,slot10 don't accept any card
If S16 card put in slot9 ,slot10 and slot11 don't accept any card

Other related questions:
EFS card capacity of metro3000
EFS support max 622M upload bandwidth , support 8 FE ports at ethernet function

Pair slot and capacity of OSN7500
SLOT 1 AND SLOT 18 paired slot SLOT 2 AND SLOT 17 paired slot SLOT 3 AND SLOT 16 paired slot SLOT 4 AND SLOT 15 paired slot SLOT 6 AND SLOT 13 paired slot SLOT 7 AND SLOT 12 paired slot SLOT 8 AND SLOT 11 paired slot SLOT 26 AND SLOT 27 paired slot SLOT 28 AND SLOT 29 paired slot SLOT 30 AND SLOT 31 paired slot T1GXCSA/T1EXCSA�?1-2�?7-18:slot capacity�?G 3-8�?1-16�?6-31:slot capacity�?0G

METRO 1000 SLOT capacity
Slot 1,slot 2,slot 3 provide 1.25G capcity respective ,slot 4 provide 622M

OptiX OSN 1500B slot connection capacity
If OptiX OSN 1500 a configuration on the master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is: When used as a big plate, slot 12 and slot 13 access capacity of 2.5 Gbit/s. When used as a small plate, four small plate a access capacity of 1.25 Gbit/s. If OptiX OSN 1500 a configuration on the master cross board for R1CXL and veneer R2CXL series, are: When used as a big plate, slot 12 access capacity of 1.875 Gbit/s, slot 13 access capacity of 1.25 Gbit/s. When used as a small plate, only slot 2, put single slot 12 and 13 can plug slot.Slot 2 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s. If OptiX OSN 1500 b on the configuration of master cross board for Q2CXL, Q3CXL and Q5CXL series veneer, is: When used as a big plate, slot 11, 12 and slot slot 13 access capacity of 2.5 Gbit/s. When used as a small plate, slot 1 ~ 3 and slot 11 ~ 13 access capacity of 1.25 Gbit/s. Description: When using Q5CXL series veneer, in Lao tze rack, slot 6 ~ 9 access capacity are 622 mbit/s;In the new child frame, slot 6 ~ 9 access capacity of 1.25 Gbit/s. If OptiX OSN 1500 b on the configuration of master cross board for R1CXL and veneer R2CXL series, are: When used as a big plate, slot 11 access capacity of 622 mbit/s, slot 12 and slot 13 access capacity of 1.25 Gbit/s. When used as a small plate, slot only 11 ~ 13 can plug put veneer, access capacity and as a big board when using the same.

Slots for the 40G board on OSN 6800 and service capacity limit
1. Service capacity limit: OptiX OSN 6800 has the TN1K1AFB, TN1K2AFB, and TN1K3AFB backplanes, and the TN11XCS and TN12XCS cross-connect boards. Different combinations have different limits on the service capacity and cross-connect configuration of the 40G board. Description of the backplane subrack and cross-connect bus of the cross-connect board: (1). All slots of TN1K1AFB backplanes have only eight pairs of cross-connect buses with a cross-connect capability of 20G (8 x ODU1) and do not support single-slot 40G boards (such as the TQX or NQ2 board that can use only channels 1 and 2). However, dual-slot 40G boards (such as the NS3 board) are supported. (2). Due to the cross-connect capacity limit, all slots of the TN11XCS board have only eight pairs of cross-connect buses with a cross-connect capability of 20G (8 x ODU1) and do not support single-slot 40G boards (such as the TQX or NQ2 board that can use only channels 1 and 2). However, dual-slot 40G boards (such as the NS3 board) are supported. (3). The combination of the TN12XCS and TN1K2AFB boards supports four slots, each of which has a 40G cross-connect capability. That is, slots 1, 4, 11, and 14 have 16 pairs of active/standby centralized cross-connect buses with a cross-connect capability of 40G (16 x ODU1) and support single-slot 40G boards (such as the TQX and NQ2 board). The other slots have eight pairs of active/standby centralized cross-connect buses with a cross-connect capability of 20G (8 x ODU1) and do not support single-slot 40G boards (such as the TQX or NQ2 board that can use only channels 1 and 2). All slots support dual-slot 40G boards (such as the NS3 board). (4). The functions of the TN1K3AFB board are consistent with those of the TN1K2AFB board. Board service capacity and cross-connect configuration: (1). In scenarios where both TN12XCS and TN1K2AFB (TN1K3AFB) boards are used, the NQ2 and TQX single-slot 40G boards can be inserted into slots 1 to 4, and support 40G service capacity and cross-connect configurations for ports 1 to 4. If the boards are inserted into other slots, they support only 20G service capacity and cross-connection configurations for ports 1 and 2. If cross-connections are configured for ports 3 and 4, an error will be reported. (2). In scenarios where TN12XCS and TN1K2AFB (TN1K3AFB) boards are not used together, if the NQ2 and TQX single-slot 40G boards are inserted into other slots, they support only 20G service capacity and cross-connect configurations for ports 1 and 2. If cross-connections are configured for ports 3 and 4, an error will be reported.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top