If slot14 allowed to install SL4 card when slot 16 installed PQ1 for metro 3000

81

Slot 14 and 16 share 4 buses ,if slot 14 install 4 vc4 bandwith card ,slot 16 bus is unavailible ;
if slot 16 install PQ1 card , slot 14 do not accept 4*vc4 bandwith card

Other related questions:
Which slot can install amplifier card on OSN3500
1. N1BA2 card put slot : 200Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?120Gbit/s cross-connection capacity:slot 1�?�?1�?7 80Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?40Gbit/s cross-connection capacity:slot 1�?�?1�?6 1. N1BPA N2BPA card put slot : 200Gbit/s cross-connection capacity:slot 1�?�?1�?7(extend slot :slot 51�?8�?1�?7�?120Gbit/s cross-connection capacity::slot 1�?�?1�?7

Provide card name that is able to query power for metro 3000
Only sl16 card support to query power ,other card doesn't support

Differences between the SL1 boards of the Metro 2050 and Metro 3000
The SL1 boards for the Metro 2050 are SS1*SL1/SS3*SL1/SS5*SL1, and the SL1 boards for the Metro 3000 are SS6*SL1.

METRO equipment 3000 cross capacity
SS61EXCS cross board is cross OptiX 2500 + system clock board, veneer can achieve 96 x96 VC - 4 levels of high-order cross, 12 or 288 x 6048 x 6048 VC - 288 VC - 3 level low cross or equivalent of VC x96vc 96-4-4, VC - 3, VC - 12 reasonable mixed configuration.From 12 line/branch clock reference source and two external clock reference source option as a source of phase lock, possess the function of the sync processing status word, at the same time for the system to provide the 155.52 MHz and 77.76 MHz, 38.88 MHz and 2.048 MHz clock signals and 2 m frame, 8 k frame signal.SS61EXCS veneer in addition to the low order cross capacity is 6048 or 288 x 288 x 6048 VC to 12 VC - 3, other function and SS62XCS, SS63XCS, SS64XCS veneer is fully compatible with (SS62XCS/SS63XCS/SS64XCS low-order intersection capacity of 2016 or 96 x 96 x 2016 VC to 12 VC - 3)

Whether front cards and rear stack cards can be used together on S series fixed switches
S5700-EI, S5710-LI, and S5700-C-SI series fixed switches have front and rear card slots. Font card slots can have 2-port or 4-port service interface cards installed. Rear card slots can have stack cards or extended channel cards installed. The rules are as follows: -- A 4-port ES5D000G4S01 or ES5D00G4SA01 GE front card and a 4-port ES5D000X4S01 10GE front card must be used with an ES5D00ETPB00 rear extended channel card; otherwise, only two ports on the 4-port front card can work. -- If an ES5D000G4S01 or ES5D00G4SA01 front card is used with an ES5D00ETPC00 rear stack card on an S5700-EI, S5700-SI, or S5710-C-LI switch, only the first two ports on the front card can work when the switch is working normally. If the ES5D000X4S01 front card is used, only ports 1 and 3 are available. --The ES5D00ETPB00 card used with the ES5D000X4S01 front card must have a PCB of version C. -- The S5700-EI switch that uses the ES5D000X4S01 front card must have a PCB of version B or later (version C on S5700-52C-EI). You can run the display version command to check the PCB version of a switch. For details about cards, see the Hardware Description. For the hardware description of S5700 switches, see S5700 Hardware Description. For the hardware description of S6700 switches, see S6700 Hardware Description.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top