How to configure Telnet for AR1200 through the web NMS

6

Solution:
I. Log in to a web page, choose System Management > System Configuration > Service Management to enter the service management page, select Enabled of Telnet Service, and click Apply.
II. Choose User Management > User Management.
1. Click the modify icon to change the default user admin and configure Telnet as an access type.
2. Alternatively, click Create to create an administrator account for Telnet login, configure a user name and password, select Telnet for Access type, and click OK.

Other related questions:
Method of configuring Telnet through the web NMS on an AR router
The method of configuring Telnet through the web NMS on an AR router is as follows: I. Enable the Telnet service. 1. Log in to the web NMS, and choose System Management > System Configuration > Service Management to enter the service management page. 2. Select Enabled of Telnet Service to enable the Telnet service. 3. Click Apply. II. Configure an account and a password for Telnet login. 1. Choose User Management > User Management. 2. Click the modify icon to change the default user admin and configure Telnet as an access type. Alternatively, click Create User to create an administrator account for Telnet login, configure a user name and a password, and select Telnet for Access type. 3. Click OK.

How to delete a user through the web NMS on an AR router
To delete local users, perform the following steps: 1. Choose User Management > User Management. 2. Select the check boxes before multiple entries, or select the check box in the table head to select all. 3. Click Delete in User List to delete the selected local users. Note: If a selected user is online (the user has logged in to the web management platform), the user cannot be deleted. To delete remote trusted hosts, 1. Choose System Management > System Configuration > Service Management. 2. Select the check boxes before multiple entries, or select the check box in the table head to select all. 3. Click Delete in Create Remote Trust Host IP to delete the remote trusted hosts.

How to configure a route through the web NMS on an AR router
To configure a static route, do as follows: 1. Choose IP Service > Route > Static Route Configuration. . 2. Click Create in the IPv4 Static Route Configuration Table or IPv6 Static Route Configuration Table according to requirements to enter the parameter configuration page. 3. Configure parameters one by one, and click OK to complete the configuration. To configure a dynamic route, do as follows: - Configure the OSPF function. 1. Choose IP Service > Route > Dynamic Route Configuration > OSPF to enter the OSPF List page. 2. Click Create, enter parameters, and click ok to create an OSPF process. 3. On the OSPF List page, select the new OSPF process, click Advanced at the right side, click the Basic or Advanced tab page, and modify the OSPF process parameters according to requirements. - Configure the BGP function. 1. Choose IP Service > Route > Dynamic Route Configuration > BGP, configure parameters, and click Apply. 2. On the Peer Configuration List page, click Create, enter parameters, and click ok to create a BGP neighbor.

Can the portal authentication function be configured through the web NMS on an AR router
The web NMS of an AR router does not support the portal authentication function. If you want to configure the portal authentication function using a command line, see the following URLs: - For details on how to configure an external portal, see the URL: Configure an example of controlling internal users to access the network through external portal authentication . - For details on how to configure an internal portal, see the URL: Configure an example of controlling internal users to access the network through built-in portal authentication.

How to configure an ACL through the web NMS on an AR router
Log in to the web NMS, and choose Security > ACL. Click a tab page to configure basic ACL, advanced ACL, or Layer 2 ACL. Configure a basic ACL so that the AR router can categorize IPv4 or IPv6 packets based on the source and destination IP addresses as well as time period carried in the packets. Configure an advanced ACL so that the AR router can categorize IPv4 or IPv6 packets based on the source and destination IP addresses, source and destination interface numbers, protocol type, priorities, as well as time period carried in the packets. Configure a Layer 2 ACL so that the AR router can categorize packets based on link layer information such as the source and destination MAC addresses and Layer 2 protocol type. Select a tab page, and click new on the configuration list. In the displayed dialog box, enter an ACL name. For the basic ACL and advanced ACL, an ACL type must be set. In the new configuration entry, click add and configure parameters. For details, see the URL: The AR router configures the VLANIF interface to implement inter-VLAN communication.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top