How many VSs can be created on a CE12800 switch

35

A maximum of 16 VSs including the Admin-VS can be created on a CE12800 switch. When the default resource specifications are used, you can create seven VSs in port group mode. To create more VSs in port group mode, adjust the number of VLANs to be used by VSs.

Other related questions:
How are MAC addresses allocated in VSs on a CE12800 switch
CE12800 series switches support 256 MAC addresses and 16 VSs (including the Admin-VS), with 32 MAC addresses assigned for the Admin-VS, and 8 for other VSs.
- Admin-VS: The first MAC address is assigned to the management interface, the second one to Layer 2 protocols, and the others to VLANIF interfaces.
- Other VSs: The first MAC address is assigned to Layer 2 protocols and the others to VLANIF interfaces.

Can VSs be created after a stack is set up
VSs can be created on CE12800 switches after they set up a stack.

How to check the port groups on CE12800 switches when VSs are allocated
Two modes are available for the VSs on CE12800 switches:
- Port mode: Any port on an interface card can be flexibly allocated to any VS.

- Port group mode: All ports on the same forwarding chip of an interface card must be allocated to the same VS. When VSs in port group mode are allocated, you need to know the mappings between the ports and forwarding chips to reasonably plan the use of the ports. You can run the display device port-map [ slot slot-id ] command on a CE12800 to check the mappings between the ports and forwarding chips.

How Many Topics Can a User Create?

A user can create a maximum of 3000 topics.


If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top