Can I reset a VS separately on CE switches and will reset of one VS affect other VSs


You can reset a VS individually except Admin-VS. Resetting a VS does not affect other VSs.

Other related questions:
How do I configure VSs
The following describes the basic configuration procedure, which is for reference only. For the detailed configuration procedure and precautions, see the appropriate configuration guide.
<HUAWEI> system-view
[~HUAWEI] admin
[~HUAWEI-admin] virtual-system vs1      //Create a VS named vs1.
[*HUAWEI-admin-vs:vs1] port-mode group      //Configure vs1 to work in group mode.(VSs can work in group or port mode.)
[*HUAWEI-admin-vs:vs1] assign interface 10GE 1/0/0      //Allocate a physical port to vs1.
Warning: All configurations of the interfaces will be deleted. All interfaces of
 the same group will be assigned. Continue? [Y/N]: y
[*HUAWEI-admin-vs:vs1] quit
[*HUAWEI-admin] commit
[~HUAWEI-admin] display virtual-system
Name                             Status
Admin-VS                         running
vs1                              running
If the status of a VS is running, the VS is created.

How can I switch from a common VS to the Admin-VS
You can only switch from the Admin-VS to a common VS, but cannot switch from a common VS to the Admin-VS.

How can I configure VS resource templates on a CE switch
Create a logical resource template and use it to allocate logical resources to a VS.
[~HUAWEI] admin
[~HUAWEI-admin] resource-template temp1 //Create a resource template.
[*HUAWEI-admin-template:temp1] resource u4route upper-limit 50000 //Configure the resource specification.
[*HUAWEI-admin-template:temp1] resource mpls enable
[*HUAWEI-admin-template:temp1] quit
[*HUAWEI-admin] virtual-system vs1
[*HUAWEI-admin-vs:vs1] assign resource-template temp1 //Load the resource template on the VS.
[*HUAWEI-admin-vs:vs1] commit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top