Whether it is necessary to activate an AR after configuration

22

Configurations of an AR take effect immediately, so no activation is required.

Other related questions:
Whether to activate after AR router configuration.
It takes effect after the AR router configuration,it does not need to be activated.

Is necessary to reboot OS after modify kernel parameters
We recommend that you reboot switch.

How can I check whether the configuration of an AR is lost after a restart
After an AR is restarted, you can log in to the AR through the console port and run the display current-configuration command to display the configuration that takes effect. If the configuration is the same as that saved on the AR, the configuration is not lost. After the AR is powered on and started, you can also run the display saved-configuration command to display the configuration file to be used for the next startup. If the configuration is the same as that saved on the AR, the configuration is not lost.

How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

Necessity for configuring SSL VPN certificate authentication on the firewall
Is SSL VPN certificate authentication necessary on the USG? During authentication and authorization, if users are required to provide certificates for authentication, certificate configurations are required. However, they are not mandatory.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top