Must four consecutive 10GE ports be simultaneously configured for a stack of CE6800 series switches

1

Among CE6800 series switches, if 10GE ports of the CE6850EI, CE6810EI, or CE6810LI need to be configured as physical member ports, four ports with consecutive port numbers 4N+1 through 4N+4 (N is a natural number) must be simultaneously configured. This restraint does not apply to other CE6800 models.

Other related questions:
Can SVF be configured on a CE6800 stack
When the CE6800 serves as the parent switch, SVF can be configured after the CE6800 is added to a stack. However, a stack can contain at most two switches. If the CE6800 is a leaf switch, SVF cannot be configured on the switch after the CE6800 is added to a stack.

Can 10GE optical ports on CE switches be used to set up a stack
The 10GE optical ports on CE switches can be used to set up a stack.

Can 10GE electrical ports on a CE switch be used to set up a stack
The 10GE electrical ports on CE series switches can be used to set up a stack.

Download product documentations about CE series switches
Download product configuration documentations from Huawei support website. 1. Visit link url="http://e.huawei.com/en/">e.huawei.com. e indicates Enterprise, that is, enterprise business. 2. Click Support. 3. On the Product Support page, select a product type (such as Switch) in the Enterprise Network area or enter a product model (such as, CE12800) in the search box. - If you select a product type, a page is displayed where you can select a specified product model. 4. On the displayed page, documentations about a specified product model are listed. Select the version you need, such as V100R006. 5. Click Product Documentation. Click a documentation to open it. To obtain references about MIBs, logs, and alarms, click Reference Guides. Some documentations must be viewed using HedEx Lite. Register at Register or log in to Download and download HedEx Lite.

Reason why the Fibre Channel switches must be configured in stacking mode
You can know the reason why the Fibre Channel switches must be configured in stacking mode by going to the FAQ-Why must the Fibre Channel switches be configured in stacking mode website.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top