How to add a stack member CE switch

24

To add a member switch to a stack, perform the following operations:
1. Upgrade the software version of the switch to the current stack system version to prevent multiple restarts resulted from version synchronization and speed up stack setup.
2. Complete the stack configuration of the switch, save the configuration, and then power off the switch.
3. Connect the switch to the stack using stack cables.
4. Power on the switch to enable it to join the stack without affecting the stack.

Other related questions:
How to add a new member to a stack?
Configure on the new switch the stack id (mandatory), the stack priority (optional) and then connect the switch to the stack.

How to restart a member CE switch in a stack
-In a stack of CE12800s, run the reset chassis chassis-id command in the user view to restart the specified member switch.
-In a stack of CE8800&7800&6800&5800s, run the reset slot slot-id command in the user view to restart the specified member switch.
Before restarting a member switch, save the stack configuration to ensure that the restarted switch can join the stack normally.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top