Can only one service port be used as a stack port for CE switches

17

Yes.
To improve reliability, you are advised to add at least two physical member ports to each stack port.

Other related questions:
Can a stack be set up using only one 40GE port on a member CE switch
A stack can be set up using only one 40GE port on a member CE switch. To ensure reliability, it is recommended that a stack be set up using two or more ports.

Can the stack ports on CE switches be used for DAD
When the MPU connection mode is used on CE12800 switches, stack ports can be configured with DAD.

If two service ports on an S series fixed switch are configured as stack ports, can other service ports on the switch that are not configured as stack ports be used to run services
For most S series fixed switches, the ports that are not configured as stack port can still run services. For example, when two rear SFP ports on an S5700-52P-LI switch are configured as stack ports, the other two rear SFP ports can forward service data. However, on the S6700EI and S6720EI, every four ports are added to one group. A group of ports must function as stack ports or service ports together. That is, when one port is configured as a stack port, the other three ports in the same group will automatically be configured as stack ports but cannot function as service ports.

Do CE series switches support service port stacking
Yes CE series switches support service port stacking.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top