How can I configure SNMP versions on a CE switch

14

Three SNMP versions are available: v1, v2c, and v3. The default SNMP version is SNMPv3.
# Set the SNMP versions used by the switch to v2c and v3.
system-view
[~HUAWEI] snmp-agent sys-info version v2c
[*HUAWEI] commit
# Configure the switch to use all SNMP versions.
system-view
[~HUAWEI] snmp-agent sys-info version all
[*HUAWEI] commit
# Set the SNMP version used by the switch to v2c.
system-view
[~HUAWEI] snmp-agent sys-info version v2c
[*HUAWEI] snmp-agent sys-info version v3 disable
[*HUAWEI] commit

Other related questions:
How can I delete the SNMP configuration on a CE switch
The undo snmp-agent command disables the SNMP agent function, but does not delete the SNMP configuration. After the snmp-agent command is re-executed, the original SNMP configuration still exists. If you need to permanently delete an SNMP configuration, run appropriate undo commands.

How can I view the SNMP configuration on a CE switch
Run the display current-configuration configuration snmp command to view the SNMP configuration on a CE switch.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top