Whether NetStream and mirroring functions can be configured simultaneously on a CE series switch

5

CE12800 series switches:
1. In V100R005C00 and earlier versions, NetStream and port mirroring cannot be configured on the same interface. NetStream may conflict with MQC-based traffic mirroring and VLAN mirroring. After NetStream is configured on an interface, you are advised not to configure any MQC-based traffic mirroring or VLAN mirroring that contains this interface.
2. Since V100R005C10, NetStream sampling can be configured to use snoop resources. This configuration allows inbound NetStream and port mirroring to be configured on the same interface.
CE7800&6800&5800 series switches:
NetStream and port mirroring cannot be configured on the same interface. NetStream may conflict with MQC-based traffic mirroring and VLAN mirroring. After NetStream is configured on an interface, you are advised not to configure any MQC-based traffic mirroring or VLAN mirroring that contains this interface.

Other related questions:
Configure NetStream on S series switches
NetStream is a traffic statistics and analysis technology. NetStream supports exporting of original, aggregation, and flexible flow statistics. The following is an example of configuring exporting of original flow on an S series switch (except the S1700). 1. Configure NetStream sampling on GE1/0/1, set the sampling mode to packet-based regular sampling, and set the interval to 1200. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] ip netstream sampler fix-packets 1200 inbound [HUAWEI-GigabitEthernet1/0/1] ip netstream sampler fix-packets 1200 outbound [HUAWEI-GigabitEthernet1/0/1] quit 2. Set the inactive aging time to 100 seconds and enable FIN- and RST-based aging. [HUAWEI] ip netstream timeout inactive 100 [HUAWEI] ip netstream tcp-flag enable 3. Set the source IP address of the exported packets carrying original flow statistics to 10.1.2.1, destination IP address to 10.1.2.2, and destination port number to 6000. [HUAWEI] ip netstream export source 10.1.2.1 [HUAWEI] ip netstream export host 10.1.2.2 6000 4. Set the version of exported packets to version 9. [HUAWEI] ip netstream export version 9 5. Enable NetStream flow statistics collection on GE1/0/1. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] ip netstream inbound [HUAWEI-GigabitEthernet1/0/1] ip netstream outbound [HUAWEI-GigabitEthernet1/0/1] quit [HUAWEI] quit

Whether S series switch mirror function can only be configured through the command line
S series switch(except S1700) mirror function can only be configured through the command line, can't configure through web.

Whether RRPP and VRRP can be configured simultaneously for S series switches
RRPP and VRRP can be configured simultaneously on an S series switch.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top