Can a converted interface be added to an Eth-Trunk

5

Converted interfaces can be added to an Eth-Trunk. The configuration method is the same as that for adding a physical interface to an Eth-Trunk.



# Add converted interface 40GE1/0/1:1 to Eth-Trunk2.

system-view

[~HUAWEI] interface eth-trunk 2

[*HUAWEI-Eth-Trunk2] trunkport 40ge 1/0/1:1

[*HUAWEI-Eth-Trunk2] commit

Other related questions:
Whether the firewall supports adding Eth-Trunk to a link group
Adding the Eth-Trunk interface to the link group on the USG The Eth-Trunk interface can be added to the link group. The link group status is Down only when all member interfaces of the Eth-Trunk are Down.

Assigning an Eth-Trunk interface to a security zone
If the Eth-Trunk interface of the USG is a Layer 3 interface, you need to assign the Eth-Trunk interface to a security zone. [FW]firewall zone untrust [FW-zone-untrust]add interface Eth-Trunk

What types of interfaces on CE switches can be added to an Eth-Trunk
Only Ethernet interfaces with the same rate can be added to the same Eth-Trunk. For example, the GE interface and 10GE interface or the 10GE interface and 40GE interface cannot be added to the same Eth-Trunk, while GE electrical interfaces and GE optical interfaces can.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top