Configure the self-negotiation mode for an interface on a CE series switch

0

The procedure for configuring the self-negotiation mode for an interface is described on the right.

Other related questions:
Configure the self-negotiation mode for an interface on a CE series switch
The procedure for configuring the self-negotiation mode for an interface is described on the right.

Can I configure parameters such as rate, auto-negotiation mode, and flow control on interfaces of CE series switches
You can use Interface Query Tool to obtain interface attributes such as the default auto-negotiation status, rate, and support for the auto-negotiation and flow control auto-negotiation configuration based on the interface type and connection medium. To use the interface query tool for CE series switches, visit http://support.huawei.com/onlinetoolsweb/DC/en/interface_query.html.

Modify attributes of interfaces on the S1728GWR-4P switch
Modify the attributes (including the auto-negotiation mode, manual setting of port rate, full duplex mode, and traffic control) of an interface on an S1728GWR-4P switch using either of the following methods: 1. Port-based configuration: a. Choose Interface > Port > General. b. Select Configure by Port Range from the Action drop-down list box. Configure parameters of interfaces within a range in a batch. c. After completing the configuration, click Apply. The configuration takes effect immediately. To check status of each interface, choose Interface > Port > General and select Show Information from the Action drop-down list box.�?2. Port list based configuration: a. Choose Interface > Port > General. b. Select Configure by Port List from the Action drop-down list box. Configure parameters of each interface. c. After completing the configuration, click Apply. The configuration takes effect immediately. To check status of each interface, choose Interface > Port > General and select Show Information from the Action drop-down list box.

How to change an interface on a CE series switch to Layer 3 mode
The procedure for changing an interface on a CE series switch to Layer 3 mode is described on the right.

How to configure the interface rate on a CE series switch
The following uses a 10GE electrical interface as an example to describe how to configure the interface rate. # Set the rate of electrical interface 10GE1/0/1 working in auto-negotiation mode to 1000 Mbit/s. system-view [~HUAWEI] interface 10ge 1/0/1 [~HUAWEI-10GE1/0/1] speed auto 1000 [*HUAWEI-10GE1/0/1] commit # Set the rate of electrical interface 10GE1/0/1 working in non-auto-negotiation mode to 1000 Mbit/s. system-view [~HUAWEI] interface 10ge 1/0/1 [~HUAWEI-10GE1/0/1] negotiation disable [*HUAWEI-10GE1/0/1] speed 1000 [*HUAWEI-10GE1/0/1] commit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top