How to configure an IP address for the management interface on a CE series switch

3

The procedure for configuring an IP addresses for the management interface on a CE series switch is described on the right.

Other related questions:
How to configure an IP addresses for a sub-interface on a CE series switch
The procedure for configuring an IP addresses for a sub-interface on a CE series switch is described on the right

Change the management IP address of the S1728GWR-4P switch
Change the management IP address of an S1728GWR-4P switch as follows: Choose System > IP. On the page displayed, configure the switch information such as the management VLAN and IP address. By default, the switch obtains an IP address through DHCP. If the switch fails to obtain an IP address through DHCP, the switch uses the IP address of 192.168.0.1. Perform the following operation to configure the switch to obtain an IP address through DHCP: 1. Choose System > IP. 2. Specify an available management VLAN for the switch and set IP地址方式 to DHCP. 3. Click Apply to save the configuration. 4. Click Restart DHCP to obtain a new IP address. Perform the following operations to configure a static IP address for the switch: 1. Choose System > IP. 2. Specify an available management VLAN for the switch, set IP Address Mode to Static, and enter an IP address, subnet mask, and gateway IP address. 3. Click Apply to save the configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top