How can I enable the traffic statistics function in a VLAN on CE switches

0

Run the statistics enable command in the VLAN or VLAN-Range view to enable the traffic statistics function in a VLAN. By default, the traffic statistics function in a VLAN is disabled.
# Enable the traffic statistics function in VLAN 10.
system-view
[~HUAWEI] vlan 10
[*HUAWEI-vlan10] statistics enable
[*HUAWEI-vlan10] commit
# Enable the traffic statistics function in VLANs 10 to 20.
system-view
[~HUAWEI] vlan range 10 to 20
[*HUAWEI-vlan-range] statistics enable
[*HUAWEI-vlan-range] commit

Other related questions:
Can the S Switch support traffic statistic for Vlan interface ?
1. All the chassis Switch can support traffic statistic. 2. S1720、S2720、S2750、S5700LI、S5700S-LI and S5710-X-LI can not support, other box Switch can support. we need configure statistic enable in vlan view for S5700SI、S5720SI、S5720S-SI.

How to enable traffic control on interfaces of CE series switches
The procedure for enabling traffic control on interfaces of CE series switches is described on the right.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top