Check whether the AR routers Console login has a default password.

6

The AR routers Console password for logging in to the default support status:
-all models AR equipment in V200R005C20 and previous versions have no default password.
-all models AR equipment after V200R005C20 version has a default password, the default user name is admin, by default, the password is:Admin@huawei.

Other related questions:
Is there a default password for console port login to an AR
ARs' support for the default console port login password is as follows: - All AR models have no default password in V200R005C20 and earlier versions. - All AR models have a default password in V200R005C20 and later versions. The default user name is admin, and the default password is Admin@huawei.

How to configure or change the password for console port login on an AR
You can use either of the following methods to configure or change the password for console port login on an AR: Method 1: Log in to the AR using Telnet or other remote login modes, and configure and change the console port login password. The following is an example (using Telnet): If you have a Telnet account and administrator rights, log in to the AR using Telnet, change the console port login password, and save the configuration. 1. Log in to the AR using a Telnet account. 2. Change the console port login password. The following example changes the authentication mode to password authentication and the password to huawei@123. [Huawei] user-interface console 0 [Huawei-ui-console0] authentication-mode password [Huawei-ui-console0] set authentication password cipher huawei@123 //Enter the password in interactive mode (V200R005C00 and later versions). [Huawei-ui-console0] return The following example changes the authentication mode to AAA authentication, user name to admin123, and password to Huawei@123. [Huawei] user-interface console 0 [Huawei-ui-console0] authentication-mode aaa [Huawei-ui-console0] quit [Huawei] aaa [Huawei-aaa] local-user admin123 password irreversible-cipher Huawei@123 [Huawei-aaa] local-user admin123 privilege level 15 [Huawei-aaa] local-user admin123 service-type terminal [Huawei-aaa] return 3. Run the save command to save the configuration to prevent configuration loss after a restart. Method 2: Clear the console port login password on the BootROM menu and change the password. You can clear the password for console port login on the BootROM menu. The system can skip password check when you log in to it through the console port. After the AR restarts, change the console port login password and save the configuration. // After the password is cleared, no password is required for the first login through the serial port. If you do not promptly change the password, you cannot re-login through the serial port after logout. 1. Connect a serial cable to the AR and restart it. When the message "Press Ctrl+B to break auto startup ..." is displayed, press Ctrl+B and enter the default password ("huawei" for V200R003C01 and earlier versions, and "Admin@huawei" for V200R005C00 and later versions) to enter the BootROM main menu. 2. Choose Password Manager > Clear the console login password > Return > Default Startup on the BootROM main menu. On the page that is displayed, clear the console port login password. Note: When you log in through the console port after the system is started, you will encounter three conditions depending on the device model. Perform the following operations as required: a. If the system prompts you to enter the password when you log in, set a password. b. If the AR is running V200R005C30 or a later version, enter the default user name (admin) and password (Admin@huawei). c. If no authentication is required when you log in, configure the console port password after the login.

Do ARs support password complexity modification
No, ARs do not support this function.

Is there a default password for an AR
ARs' support for the default web login password is as follows: - The AR1200, AR2200, and AR3200 running V200R003 to V200R005C20 have no default password. - The AR1200-S, AR2200-S, and AR3200-S running V200R003 to V200R005C10 have no default password. - The AR3200-S running V200R005C20 has no default password. - Other ARs have a default password.

Is there a default password for Telnet login to an AR
ARs' support for the default Telnet login password is as follows: - The AR150, AR200, AR150-S, and AR200-S running V200R003 have no default user name or password. - The AR150, AR160, AR200, AR150-S, AR160-S, and AR200-S running V200R005C00 to V200R005C20 have the default user name admin, and default password Admin@huawei or admin. - The AR1200, AR2200, and AR3200 running V200R003 to V200R005C20 have no default user name or password. - The AR1200-S, AR2200-S, and AR3200-S running V200R003 to V200R005C10 have no default user name or password. - The AR1200-S and AR2200-S running V200R005C20 have the default user name admin, and default password Admin@huawei or admin. - The AR3200-S running V200R005C20 has no default user name or password. - All AR models running V200R005C30 and later versions have the default user name admin, and default password Admin@huawei.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top