Got it

Do CE switches support GVRP

81

GVRP has been available since V200R001C00.

Other related questions:
GVRP mechanism on S series switch
The Generic Attribute Registration Protocol (GARP) provides a mechanism to propagate attributes so that a protocol entity can register and deregister attributes. The GARP VLAN Registration Protocol (GVRP) is used to register and deregister VLAN attributes. A manually configured VLAN is a static VLAN, and a VLAN created through GVRP is a dynamic VLAN. VLAN registration: adds a port to a VLAN. When a port receives a VLAN attribute declaration, it registers the VLAN specified in the declaration. VLAN deregistration: removes a port from a VLAN. When a port receives a VLAN attribute declaration, it deregisters the VLAN specified in the declaration.
GVRP configuration on S series switch
Configure GVRP on an S series switch, except S1700: 1. Enable GVRP globally. Note: On an S series switch, except S9300, the VCMP role must be configured as Transparent or Silent. [HUAWEI] vcmp role silent [HUAWEI] gvrp 2. Add interfaces to VLANs. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] port link-type trunk [HUAWEI-GigabitEthernet1/0/1] port trunk allow-pass vlan all [HUAWEI-GigabitEthernet1/0/1] quit [HUAWEI] interface gigabitethernet 1/0/2 [HUAWEI-GigabitEthernet1/0/2] port link-type trunk [HUAWEI-GigabitEthernet1/0/2] port trunk allow-pass vlan all [HUAWEI-GigabitEthernet1/0/2] quit 3. Enable GVRP on interfaces. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] gvrp [HUAWEI-GigabitEthernet1/0/1] quit [HUAWEI] interface gigabitethernet 1/0/2 [HUAWEI-GigabitEthernet1/0/2] gvrp [HUAWEI-GigabitEthernet1/0/2] quit 4. Set the timer to recommended value. [HUAWEI] garp timer leaveall 12000 [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] garp timer leave 3000 [HUAWEI-GigabitEthernet1/0/1] garp timer join 600 [HUAWEI-GigabitEthernet1/0/1] garp timer hold 100 [HUAWEI-GigabitEthernet1/0/1] quit 5. (Optional) Set the registration mode on interfaces. The registration mode is set to Fixed here. The default mode is Normal. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] gvrp [HUAWEI-GigabitEthernet1/0/1] gvrp registration fixed [HUAWEI-GigabitEthernet1/0/1] quit
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.