Homepage FAQ Switch

Check the WWPNs of the storage device and server after FCoE is configured on a CE series switch

123

After configuring the FCoE function, you can check registration information about the storage device and server on the switch enabled with the FCF function.
display fcoe name-server brief
The Name-Server Information:
-------------------------------------------------------------------------------
Interface FC-ID WWPN
-------------------------------------------------------------------------------
FCoE1/0/1 16.00.01 30:00:00:68:50:40:30:02
FCoE1/0/2 16.00.02 30:00:00:68:50:40:30:01
-------------------------------------------------------------------------------
Total: 2

Other related questions:

Add the storage device and server to a zone on a CE series switch

On a Fibre Channel over Ethernet (FCoE) network, you can configure zones to control access between ENodes to improve the network security.
A zone contains multiple members, and an ENode can join different zones. Members in the same zone can communicate with each other, whereas members in different zones cannot.
Member nodes can be added to a zone based on the WWPN, WWNN, FC_ID, and FC or FCoE interface. The WWPN mode is recommended. system-view
[~HUAWEI] zone zone1
[*HUAWEI-zone-zone1] member wwpn 20:00:00:9f:be:30:20:10
[*HUAWEI-zone-zone1] quit
[*HUAWEI] commit

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Check the WWPNs of the storage device and server after FCoE is configured on a CE series switch

Other related questions:

If you have more questions, you can seek help from following ways: