Whether the initial configuration on the AR can be performed without the console cable

6

If there is the default IP address before delivery, configurations can be performed through the web platform without the console cable. If there is no default IP address, configuration cannot be performed without the console cable. The support of the default IP address before delivery is as follows.
Devices support the web platform: ARV200R005&  ARV200R005C90& AR150& ARV200R006;AR160& AR200,
AR150-S& ARV200R005C00; AR200-S,
ARV200R005C10& ARV200R005C20& ARV200R005C21& ARV200R005C30& ARV200R005C31& ARV200R005C32& ARV200R005C60& ARV200R005C70& ARV200R005C90& AR150-S& of ARV200R006; AR160-S& AR200-S,
ARV200R005C20& ARV200R005C21& ARV200R005C30& ARV200R005C31& ARV200R005C32& ARV200R005C60& ARV200R005C70& ARV200R005C90& AR1200–S& of ARV200R006; AR2200–S& AR3200–S,
ARV200R005C90& AR120–S of ARV200R006,
ARV200R005C90& AR120& of ARV200R006; AR500& AR1200& AR2200& AR3200& AR3600, and
ARV200R005C30& ARV200R005C31& ARV200R005C32& ARV200R005C60& ARV200R005C70& ARV200R005C90& AR510 of ARV200R006

Other related questions:
How to log in to the device on AR routers for the first time through a console port
When you log in to the device through the console port, you need to install the terminal access software on the local PC (such as SecureCRT software) and set parameters of the terminal simulation software. After the login succeeds, you can configure the following parameters based on the requirements:
- Set the system date, time and time zone.
- Set the device name and management IP address.
- Set other login modes.
For example, after a user logs in through the console port for the first time, the configuration of remote login through Telnet is as follows:
1. Set the system date, time, and time zone.
clock timezone BJ add 08:00:00
clock datetime 20:10:00 2012-07-26
2. Set the device name and management IP address
system-view
[Huawei] sysname Server
[Server] interface gigabitethernet 0/0/0
[Server-GigabitEthernet0/0/0] ip address 10.137.217.177 24
[Server-GigabitEthernet0/0/0] quit
3. Set the level and authentication mode of the Telnet user
[Server] telnet server enable
[Server] user-interface vty 0 4
[Server-ui-vty0-4] user privilege level 15
[Server-ui-vty0-4] authentication-mode aaa
[Server-ui-vty0-4] quit
[Server] aaa
[Server-aaa] local-user admin1234 password irreversible-cipher Helloworld@6789
[Server-aaa] local-user admin1234 privilege level 15
[Server-aaa] local-user admin1234 service-type telnet
[Server-aaa] quit

Cables of the Console Interface on an AR
The console cable is used to connect the RJ45 connector of the console interface and DB9 connector of the serial interface of the PC.

Which AR models are not delivered with console cables
The console cable is not included in the following AR series and needs to be purchased separately: AR100/AR120/AR150/AR160/AR200 series AR100-S/AR110-S/AR120-S/AR150-S/AR160-S/AR200-S series AR500 series and AR510 series

Description of the console cable
A console cable connects the console interface of an AR to the serial interface of a PC. The cable connects to the AR through the RJ45 connector and connects to the PC through the DB9 connector.

Can the TE Desktop initiate MCU calls without registration?
The TE Desktop must be registered to initiate MCU calls. You can log in to the TE desktop and initiate calls only after the TE Desktop is registered with a SIP server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top