Do CE series switches provide a default password for console port login

22

There is no default password for console port login on CE series switches. When you log in to a switch through the console port for the first time, the system prompts you to configure a login password.

Other related questions:
Do CE series switches provide a default Telnet login password
By default, CE series switches do not provide a default Telnet login password. You need to configure a Telnet login password after logging in to a switch.

Is there a default password for console port login to an AR
ARs' support for the default console port login password is as follows: - All AR models have no default password in V200R005C20 and earlier versions. - All AR models have a default password in V200R005C20 and later versions. The default user name is admin, and the default password is Admin@huawei.

Delete console port password on s series switch
When you log in to an S series switch (except S1700 switches) through the console port for the first time, the system prompts you to configure a login password. You can use either of the following methods to delete the console port login password: 1. Delete the console port login password on the console user interface. system-view [HUAWEI] user-interface console 0 [HUAWEI-ui-console0] undo authentication-mode Warning: After authentication-mode is deleted, users must configure a new password if users login through the user-interface ui-console0 or configure an authentication mode for current user-interface before next time login. Otherwise, users cannot login. Continue?[Y/N]:y Info: The password was cleared. [HUAWEI-ui-console0] return 2. Delete the console port login password on the BootROM menu. [Note]If a modular switch is used and configured with dual main processing units (MPUs), remove the slave MPU before performing the following operations. After the following operations are complete, install the slave MPU again, and then run the save command to ensure consistent configuration between the two MPUs. On the BootROM menu of the switch, you can clear the console port login password and set a new password after starting the switch. Perform the following operations: a. Connect to the console port of the switch and restart the switch. When the following information is displayed, press Ctrl+B and enter the BootROM password to enter the BootROM main menu: Information displayed on modular switches: Press Ctrl+B to enter boot menu ... 1 Password: //Enter the BootROM password. Information displayed on fixed switches: Press Ctrl+B or Ctrl+E to enter BootROM menu ... 2 password: //Enter the BootROM password. [Note] Some fixed switch models allow you to enter the BootROM main menu by pressing Ctrl+E. Perform operations as prompted. The default BootROM password is as follows: - For fixed S series switches running a version earlier than V100R006C05, the default BootROM password is huawei; for fixed switches running V100R006C05 or a later version, the default BootROM password is Admin@huawei.com. - The default BootROM password for S12700 switches is Admin@huawei.com. For S7700&S9700 series switches running a version earlier than V100R006C00, the default BootROM password is 9300; for S7700&S9700 series switches running V100R006C00 or a later version, the default BootROM password is Admin@huawei.com. b. Select Clear password for console user on the BootROM main menu to clear the password for console port login. c. Select Boot with default mode on the BootROM main menu to start the switch. d. After the switch is started, log in through the console port (authentication is not required), and set a password as prompted after login. e. After you log in to the switch, you can set an authentication mode and password for the console user interface if required.

Check whether the AR routers Console login has a default password.
The AR routers Console password for logging in to the default support status: -all models AR equipment in V200R005C20 and previous versions have no default password. -all models AR equipment after V200R005C20 version has a default password, the default user name is admin, by default, the password is:Admin@huawei.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top