What is a hybrid port ?

63

A hybrid interface can connect to either a user host or a switch, and it can connect to an access link or a trunk link.
A hybrid interface permits frames from multiple VLANs to pass and can remove VLAN tags of outgoing frames.

Other related questions:
Method used to configure the Hybrid interface on USG firewalls?
The method used to configure the Hybrid interface on the USG2000, USG5000, and USG6000 is as follows: The Hybrid interface can be used to connect to both the user host and the other switches. sys [USG]vlan batch 2 3 //Create a VLAN. [USG] interface gigabitethernet 0/0/2 [USG-GigabitEthernet0/0/2]Portswitch //Convert an L3 interface to an L2 interface. If the interface is an L2 interface, this command is not required. [USG-GigabitEthernet0/0/2]port link-type hybrid //Set the interface type to Hybrid. [USG-GigabitEthernet0/0/2]port hybrid untagged vlan 2 //Set the packets of VLAN 2 to be sent without carrying tags. [USG-GigabitEthernet0/0/2]port hybrid pvid vlan 2 //(Optional) Set the default VLAN to VLAN 2 (the default VLAN is VLAN 1 previously). [USG-GigabitEthernet0/0/2]port hybrid tagged vlan 3 //Set the packets of VLAN 3 to be sent with tags.

How do I configure hybrid interface of S series switch
Example for configuring a VLAN for a hybrid interface For S series switches (except S1700 switches): A hybrid interface can connect to either a user host or a switch. [HUAWEI]vlan 2 //Create a VLAN. [HUAWEI]interface gigabitethernet0/0/2 [HUAWEI-GigabitEthernet0/0/2]port link-type hybrid //Set the link type of the interface to hybrid. [HUAWEI-GigabitEthernet0/0/2]port hybrid untagged vlan 2 //Configure VLAN 2 to send data in untagged mode. [HUAWEI-GigabitEthernet0/0/2]port hybrid pvid vlan 2 //(Optional) Specify VLAN 2 as the default VLAN (default value: VLAN 1). [HUAWEI-GigabitEthernet0/0/2]port hybrid tagged vlan 3 //Configure VLAN 3 to send data in tagged mode.

Configuring hybrid interfaces on WLAN devices
The following example describes how to configure a hybrid interface on a WLAN device: - A hybrid interface can connect to either a user device or a switch. [HUAWEI]vlan 2 //Create a VLAN. [HUAWEI-vlan2]quit [HUAWEI]interface gigabitethernet0/0/2 [HUAWEI-GigabitEthernet0/0/2]port link-type hybrid //Set the interface type to hybrid. [HUAWEI-GigabitEthernet0/0/2]port hybrid untagged vlan 2 //Configure the interface to allow packets from VLAN 2 to pass through in untagged mode. [HUAWEI-GigabitEthernet0/0/2]port hybrid pvid vlan 2 //(Optional) Specify VLAN 2 as the default VLAN of the interface (default: VLAN 1). [HUAWEI-GigabitEthernet0/0/2]port hybrid tagged vlan 3 //Configure the interface to allow packets from VLAN 3 to pass through in tagged mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top