Is the firewall virtual system controlled by the license?

35

Yes.

Other related questions:
Number of default virtual firewalls
The default virtual firewalls are as follows: -In versions earlier than V300R001SPC500, the system supports two virtual firewalls by default. After a license is purchased, the number of virtual firewalls is specified in the license. -In V300R001SPC500 and later versions, the system supports 10 virtual firewalls by default. After a license is purchased, the number of virtual firewalls is the sum of the number of virtual firewalls supported by the device and the number of virtual firewalls specified in the license.

Configuring virtual systems on the USG6000 series
The virtual system has the following application scenarios: 1. An enterprise may have multiple departments, and each department has specific functions and responsibilities and requires specific network management policies, which complicate the configuration. As the egress gateway of the enterprise network, the NGFW uses virtual systems to manage departments separately, simplifying the configuration. For configuration details, search for "Web Example for Configuring Virtual Systems to Isolate Enterprise Departments (Layer-3 Access, Virtual Systems Sharing the WAN Interface of the Root System)" in the product documentation. 2. The NGFW functions as the access gateway of the office area of a large campus network to protect the intranet. The intranet has multiple service departments, and the administrator configures virtual systems for each department to implement independent management over department networks. For configuration details, search for "Web Example for Configuring Virtual Systems to Isolate Enterprise Departments (Layer-3 Access, Virtual Systems Having Independent WAN Interfaces)" in the product documentation. 3. When the NGFW connects to an intranet through Layer-2 access, configure virtual systems to isolate enterprise departments and facilitate configuration management by different administrators. For configuration details, search for "Web Example for Configuring Virtual Systems to Isolate Enterprise Departments (Layer-2 Access)" in the product documentation.

Configuring virtual firewalls for the USG2000&5000 series
This section provides an example for configuring multiple virtual firewalls (or VPN instances) on the USG to provide relatively independent services to multiple small-scale private networks. These virtual firewalls share the hardware but have the data mutually isolated to guarantee respective independence and security. For configuration details, search for "Example for Configuring Virtual Systems" in the product documentation.

Configuring virtual routers on the firewall
Perform as follows to configure virtual routers on the firewall: You can configure a virtual router to isolate VPN routes. 1. Choose Network > Route > Virtual Route. 2. In Virtual Router List, click Add. 3. Enter the name of the virtual router to be created. 4. Click OK. If the new virtual router entry is displayed, the operation succeeds.

Accessing the virtual system configuration view on the USG6000
In the system view, run the switch vsys vsys-name command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top