Statistics collection intervals supported by the NMS for S series switches

2

For S series switches (except the S1700), you can set the statistics collection interval on the NMS to 5 min, 15 min, 30 min, 60 min, or 1 day.

Other related questions:
Traffic statistics collection on S series switch
On S series switches (except S1700 switches), the statistic enable command in the traffic behavior view can be used to enable traffic statistics collection in the traffic behavior. To view the statistics about packets matching a traffic policy, enable the traffic statistics collection function. After the traffic statistics collection function is enabled, you can run the display traffic policy statistics command to view packet statistics. For the example for configuring traffic statistics, see "Example for Configuring Traffic Statistics" in Typical QoS Configuration.

How to configure the interval for collecting traffic statistics on an interface of a CE series switch
The procedure for configuring the interval for collecting traffic statistics on an interface of a CE series switch is described on the right.

Unit of traffic statistics collection on an S series switch
For the S series modular switches: SA cards of the S series support packet-based traffic statistics only, and all other cards support both packet-based traffic statistics and byte-based traffic statistics. For the S series fixed switches: - The S2700SI, S2710SI, S2700EI, S3700SI, S3700EI, S3700HI, S5700EI, S5710EI, S5720EI, S5700HI, S5710HI, S5720HI, S6700EI, S6720EI, and S6720S-EI support both packet-based traffic statistics and byte-based traffic statistics. - The S1720GFR, S1720GW-E, S1720GWR-E, S2720EI, S2750EI, S5700S-LI, S5700LI, S5710-C-LI, S5710-X-LI, S5700SI, S5720LI, S5720S-LI, S5720S-SI, S5720SI, and S600-E support packet-based traffic statistics but not byte-based traffic statistics. After traffic statistics mode by-bytes is configured in the system view and traffic statistics is configured in a traffic policy, the switches support byte-based traffic statistics. After the traffic statistics mode by-bytes command is configured in the system view and traffic statistics is configured in a traffic policy, the S1720GFR, S1720GW-E, S1720GWR-E, S2720EI, S2750EI, S5700LI, S5700S-LI, S5710-X-LI, S5720LI, S5720S-LI, S5720SI, S5720S-SI, and S600-E running V200R009 or a later version support byte-based traffic statistics.

Do CE12800 series switches support traffic statistics collection on sub-interfaces
In V200R001C00 and later versions, CE12800 series switches support traffic statistics collection on Layer 3 sub-interfaces.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top