S series switches enabled with SNMP achieve network management across network segments

24

S series switches (except S1700) can achieve network management across network segments as long as there are reachable routes.

Other related questions:
How to configure the interworking between the service network segment and management network segment on S series switches
User requirements: In the following network topology, the IP address of the PC and the management address of the S2700 are not on the same network segment. The user wants to remotely log in to the S2700 from the PC, so that the service gateway and the management network segment can communicate with each other. Network topology: S5700 (gateway) �?S2700 �?PC Networking description: Configure the S5700 as the service gateway and device management gateway. Configure the management IP address for the S2700 and enable the switch to transparently transmit packets of the service VLAN 10 and the management VLAN 100. Connect GE0/0/1 on the S5700 to GE0/0/1 on the S2700, and FE0/0/1 on the S2700 to the PC. Service planning: Service VLAN: 10 Management VLAN: 100 IP address of VLAN 10 of the S5700: 192.168.10.1 IP address of VLAN 100 of the S5700: 100.1.1.1 IP address of VLAN 100 of the S2700: 100.1.1.2 Service IP address of the PC: 192.168.10.2 S5700 configuration [Huawei]vlan 10 [Huawei -vlan10]quit [Huawei] vlan 100 [Huawei-vlan100]quit [Huawei]interface Vlanif 10 //Configure an IP address for the service VLAN 10. [Huawei-Vlanif10]ip address 192.168.10.1 24 [Huawei-Vlanif100]quit [Huawei]interface Vlanif 100 //Configure an IP address for the management VLAN 100. [Huawei-Vlanif100]ip address 100.1.1.1 24 [Huawei-Vlanif100]quit [Huawei]interface GigabitEthernet 0/0/1 //Configure the interface connected to the S2700 and allow the interface to transparently transmit packets of VLAN 10 and VLAN 100. [Huawei-GigabitEthernet0/0/1]port link-type trunk [Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 100 [Huawei-GigabitEthernet0/0/1] quit [Huawei]quit S2700 configuration [Huawei]vlan 10 [Huawei -vlan10]quit [Huawei] vlan 100 [Huawei-vlan100]quit [Huawei]interface Vlanif 100 //Configure a management IP address for the S2700. [Huawei-Vlanif100]ip address 100.1.1.2 24 [Huawei-Vlanif100]quit [Huawei]interface GigabitEthernet 0/0/1 //Configure the interface connected to the S5700 and allow the interface to transparently transmit packets of VLAN 10 and VLAN 100. [Huawei-GigabitEthernet0/0/1]port link-type trunk [Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 100 [Huawei-GigabitEthernet0/0/1] quit [Huawei]interface Ethernet 0/0/1 //Configure the interface connected to the PC to allow packets of the service VLAN 10 to pass through. [Huawei-Ethernet0/0/1]port link-type access [Huawei-Ethernet0/0/1]port default vlan 10 [Huawei-Ethernet0/0/1]quit [Huawei]ip route-static 0.0.0.0 0.0.0.0 100.1.1.1 //On the S2700, configure a default route destined for the management IP address of the S5700. [Huawei]quit PC configuration IP: 192.168.10.2 Gateway: 192.168.10.1 Subnet mask: 255.255.255.0

How to configure the service network segment and the management network segment connected
default route

S series switch SNMP OID
A Management Information Base (MIB) is a database that stores the variables (information that can be queried and set by the agent) on managed devices A MIB defines the attributes of managed devices, including name, status, access permission, and data type. MIB stores information using a tree structure. The leaf nodes of the tree are managed objects (MOs). An MO is identified by the set of nodes along the path from the root to the leaf node. Such a path is called object identifier (OID). An OID consists of positive integers and zero, and it is used to uniquely identify an MO in the MIB. For example, an SNMP object can be identified as { iso(1).org(3).dod(6).internet(1).snmpV2(6) }, which can be simplified to 1.3.6.1.6. The identifier is called an OID.

Subnet-based VLAN assignment on S series switch
Example of configuring IP subnet-based VLAN assignment for S series switches (except S1700 switches): 1. Configuration roadmap 1) Create VLANs, and add an interface to the VLANs so that the interface allows packets of IP subnet-based VLANs to pass through. 2) Enable IP subnet-based VLAN assignment on the interface, and associate IP subnets with the VLANs, so that the switch can determine the VLANs to which received packets belong according to the source IP addresses or specified subnets in the packets. 2. Configuration procedure 1) Create VLANs. [HUAWEI] vlan batch 100 200 //Create VLAN100 and VLAN 200. 2) Configure an interface. [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] port link-type hybrid //Set the interface type to hybrid. [HUAWEI-GigabitEthernet0/0/1] port hybrid untagged vlan 100 200 //Add the interface to VLAN 100 and VLAN 200 in untagged mode. [HUAWEI-GigabitEthernet0/0/1] ip-subnet-vlan enable //Enable IP subnet-based VLAN assignment on the interface. [HUAWEI-GigabitEthernet0/0/1] quit 3) Associate IP subnets with VLANs. [HUAWEI] vlan 100 [HUAWEI-vlan100] ip-subnet-vlan 1 ip 192.168.1.2 24 priority 2 //Associate IP subnet 192.168.1.2/24 with VLAN 100 and set the 802.1p priority of VLAN 100 to 2. [HUAWEI-vlan100] quit [HUAWEI] vlan 200 [HUAWEI-vlan200] ip-subnet-vlan 1 ip 192.168.2.2 24 priority 3 [HUAWEI-vlan200] quit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top