Can community attributes be viewed on an S series switch

3

For an S series switch (except S1700), you can view the community read-write attribute in the device's configuration file. You can also view the community read-write attribute on the SNMP feature page of the web NMS.

Other related questions:
How to view an SNMP community name on a CE series switch
You can run the display snmp-agent community command to view the configured SNMP community names in cipher text; however, the community names in plain text cannot be displayed.

Does the S series switch support bootfile Name (66) and TFTP (67) attribute
S series switches (excluding the S1700) support options 1 to 254. When a client sends a DHCP Request message with corresponding option field, the DHCP server will respond with the response message with the same option field.

In which views can IPSG be enabled on S series switches
IPSG can be enabled on an S series switch (except the S1700) in an interface or a VLAN view. Interface views include the Ethernet interface view, GE interface view, 40GE interface view, XGE interface view, 100GE interface view, Eth-Trunk interface view, and port group view. Example 1: Enable IPSG in the GE0/0/1 view. [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] ip source check user-bind enable Example 2: Enable IPSG in the VLAN 100 view. [HUAWEI] vlan 100 [HUAWEI-vlan100] ip source check user-bind enable

Can I view the port number on an S series switches
No command is available to display the port number of a data packet on an S series switches. To obtain the port number of a data packet, run the display mac-address command to view the source MAC address of the packet, determine the port receiving the packet, and then use Wireshark to capture it.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top