Whether sFlow for S series switches is compatible with protocols of other vendors

7

NetFlow is other vendor's proprietary protocol. sFlow for S series switches is not compatible with NetFlow.

Other related questions:
Compatibility between Huawei UltraPath and products of other vendors
Huawei UltraPath is incompatible with other vendors' array products.

Whether S series switches support sFlow
Sampled Flow (sFlow) is a traffic monitoring technology that collects and analyzes traffic statistics. The sFlow system involves an sFlow agent embedded in a device and a remote sFlow collector. The sFlow agent obtains traffic statistics from an sFlow-enabled interface and encapsulates them into sFlow packets. When an sFlow packet buffer overflows or an sFlow packet expires (exceeding 1s), the sFlow agent sends the sFlow packets to the sFlow collector. The sFlow collector analyzes the sFlow packets and displays the traffic statistics in a report. - S series modular switches support sFlow. However, X1E series cards, and XGE interfaces connected to the ACU2, ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, and ET1D2FW00S02 cards do not support sFlow. Flow sampling and counter sampling can only be used on Layer 2 physical interfaces, including member interfaces of an Eth-Trunk, but cannot be used on Eth-Trunk interfaces and Layer 3 interfaces. - The following S series fixed switches support sFlow: S1720GW-E and S1720GWR-E in V200R010 and later versions S2720EI in V200R006 and later versions (The S2720EI is unavailable in V200R007 and later versions.) S2750EI in V200R003 and later versions S5700LI and S5700S-LI in V200R003 and later versions S5710-X-LI in V200R008 and later versions S5700EI in V100R005 and later versions (The S5700EI is unavailable in V200R006 and later versions.) S5710EI in V200R001 and later versions (The S5710EI is unavailable in V200R006 and later versions.) S5720EI in V200R007 and later versions S5720LI and S5720S-LI in V200R010 and later versions S5720SI and S5720S-SI in V200R008 and later versions S5700HI in V100R006 and later versions (The S5700HI is unavailable in V200R006 and later versions.) S5710HI in V200R003 and later versions (The S5710HI is unavailable in V200R006 and later versions.) S6700EI in V100R006 and later versions (The S6700EI is unavailable in V200R006 and later versions.) S6720EI in V200R008 and later versions S6720S-EI in V200R009 and later versions S600-E in V200R010 and later versions Flow sampling and counter sampling can only be used on Layer 2 physical interfaces, including member interfaces of an Eth-Trunk, but cannot be used on Eth-Trunk interfaces and Layer 3 interfaces. - E series switches support sFlow. Flow sampling and counter sampling can only be used on Layer 2 physical interfaces, including member interfaces of an Eth-Trunk, but cannot be used on Eth-Trunk interfaces and Layer 3 interfaces.

Whether the S-series switches block the protocol port
Whether the S-series switches block the protocol port

Can S switch learn the vlan automatically from other vendor's device ?
sorry, they can not

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top