How do I query the MIB of an AR router?

52

The MIB can be queried through the following Web site: http://support.huawei.com/onlinetoolsweb/infoM/index.do?domain=1&lang=en&topicType=mib

Other related questions:
How do I query the ESN of an AR
The Equipment Serial Number (ESN) of an AR is unique. When applying for a license, provide the ESN of the AR. You can run the display esn command on the AR to check the ESN.

MIB node of CPU usage
The HUAWEI-CPU-MIB file is used to query CPU usage information of the SRU and interface card. The hwCpuDevTable is used to describe CPU usage. The OID prefix of the table is 1.3.6.1.4.1.2011.6.3.4.1. The indexes of the table are hwFrameIndex, hwSlotIndex, and hwCpuDevIndex. hwCpuDevIndex [1] Integer32 This node is used for expansion. On a single-CPU router, this value is 0. not-accessible For the SRU, the value 0 indicates the information of the primary core, and a value from 1 to 255 indicates the information of a secondary core. Example: 5 indicates that the CPU usage of the primary core of the SRU is 27% and the CPU usage of the secondary core 1 is 1%. ***** SNMP QUERY STARTED ***** 1: hwCpuDevDuty.0.0.0 (integer) 27 2: hwCpuDevDuty.0.0.1 (integer) 1 3: hwAvgDuty1min.0.0.0 (integer) 27 4: hwAvgDuty1min.0.0.1 (integer) 1 5: hwAvgDuty5min.0.0.0 (integer) 27 6: hwAvgDuty5min.0.0.1 (integer) 1 ***** SNMP QUERY FINISHED *****

What is the MIB file of an AR that is used to query QoS
MIB file name: HUAWEI-CBQOS-MIB.mib hwCBQoSIfApplyPolicyTable (OID: 1.3.6.1.4.1.2011.5.25.32.1.1.4.1) //You can use this table to obtain QoS policies applied to all devices. hwCBQoSIfQueueRunInfoTable (OID: 1.3.6.1.4.1.2011.5.25.32.1.1.5.1.6) //You can use this table to obtain queue statistics in QoS policies, including packets matching the queue, packets entering the queue, discarded packets in the queue, number of bytes, rate of packets, and rate of bytes. To download the MIB file, access http://support.huawei.com/support/pages/news/NewsInfoAction.do?doc_id=IN0000062954&colID=ROOTENWEB|CO0000000170&actionFlag=view.

How do I query IP traffic on an AR
The display ip statistics command displays the IP traffic statistics. Generally, you can run this command to check statistics on sent and received packets during service diagnosis. To monitor specific service packets, for example, to implement accounting, network monitoring, and user monitoring based on statistics analysis of network service traffic, configure the NetStream function. To obtain classified IP packet statistics by service data flows, for example, to obtain IP packet statistics of a specific user, configure the IP accounting function.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top