Can the NTP server function be disabled on an S series switch that functions as a client

6

You can run the ntp-service server disable command on an S series switch (except the S1700) to disable the NTP server function.
Perform the following configuration:
[HUAWEI] ntp-service server disable

Other related questions:
Can an S series switch function as the NTP server
The following is an example of configuring the NTP server function in broadcast mode. [HUAWEI] ntp-service refclock-master 3 //Configure the local clock as the NTP master clock. [HUAWEI] undo ntp-service server disable //Enable the IPv4 NTP server function. [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ip address 10.1.1.1 24 //Configure an IP address for the server. [HUAWEI-Vlanif100] ntp-service broadcast-server //Configure the local switch as the NTP broadcast server.

Since which version do S series switches support the command to disable the NTP service function
You can run the ntp-service disable command on an S series switch (except the S1700) in V200R001 or a later version to disable the NTP service function.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top