Whether S series switches support NQA

17

To support NQA, the version of the S9300 must be V100R002 or later, the version of the S7700 must be V100R003 or later, the version of the S9700 must be V200R001 or later, and the version of the S12700 must be V200R005 or later. The NQA function is controlled by a license. On a new device without the corresponding licenses loaded, NQA commands can be executed, but the function does not take effect.
All S series fixed switches (except S1700 switches) support the NQA function. NQA test instances supported by different switch models vary and can be used without a license.

Other related questions:
Configure NQA on S series switches
Network quality analysis (NQA) monitors network quality of services, and locates and diagnoses network faults by constructing various test instances and sending different types of probe packets. The following is an example of configuring ICMP on an S series switch (except the S1700). 1. Configure a test instance. [HUAWEI] nqa test-instance admin icmp [HUAWEI-nqa-admin-icmp] test-type icmp [HUAWEI-nqa-admin-icmp] destination-address ipv4 10.1.1.2 2. Start the measurement. [HUAWEI-nqa-admin-icmp] start now 3. Check the diagnosis result. [HUAWEI-nqa-admin-icmp] display nqa results test-instance admin icmp //The command output is not provided here.

Do S series switches support SNMP?
SNMP is a basic feature of S series switches (except S1700), and is supported by all device models and versions.

Whether S series switches support OSPF
For details on whether S series switches in V200R008 and earlier versions support or do not support OSPF, see the following: �?S7700/S9700/S12700: Support �?S9300: Support �?S6720EI: Support �?S6700EI: Support �?S5720HI: Support �?S5710HI: Support �?S5700HI: Support �?S5720EI: Support �?S5710EI: Support �?S5700EI: Support �?S5720SI/S5720S-SI: Support �?S5700SI: Not support �?S5710LI: Not support �?S5700LI: Not support �?S5700S-LI: Not support �?S3700HI: Support �?S3700EI: Support �?S3700SI: Not support �?S2750EI: Not support �?S2720EI: Not support �?S2700EI: Not support �?S2710SI: Not support �?S2700SI: Not support �?S1720: Not support For details on whether S series switches in V200R008 and earlier versions support or do not support OSPFv3, see the following: �?S7700/S9700/S12700: Support �?S9300: Support �?S6720EI: Support �?S6700EI: Support �?S5720HI: Support �?S5710HI: Support �?S5700HI: Support �?S5720EI: Support �?S5710EI: Support �?S5700EI: Support �?S5720SI/S5720S-SI: Support �?S5700SI: Not support �?S5710LI: Not support �?S5700LI: Not support �?S5700S-LI: Not support �?S3700HI: Support �?S3700EI: Support �?S3700SI: Not support �?S2750EI: Not support �?S2720EI: Not support �?S2700EI: Not support �?S2710SI: Not support �?S2700SI: Not support �?S1720: Not support

Whether S series switches support NAT
S series switches do not support NAT, but S series modular switches configured with SPUs support NAT. 1. S series fixed switches do not support NAT. 2. S7700 and S9700 series modular switches configured with SPUs support NAT. 3. S9300 series modular switches configured with SPUs support NAT. 4. S12700 series modular switches do not support NAT.

Whether S series switches support HWTACACS
S series switches (except S1700 switches) support HWTACACS.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top