Which cards of S series switches support NetStream

3

On an S series switch, NetStream is supported by E series and X1E series cards.

Other related questions:
Card models supported by S series switches
For card models supported by S series switches, you can use Hardware Query Tool to query details or see "Cards" in the Hardware Description. For the hardware description of the S9300 and S9300E, see S9300&S9300E Hardware Description. For the hardware description of the S7700, see S7700 Hardware Description. For the hardware description of the S9700, see S9700 Hardware Description. For the hardware description of the S12700, see S12700 Hardware Description.

Configure NetStream on S series switches
NetStream is a traffic statistics and analysis technology. NetStream supports exporting of original, aggregation, and flexible flow statistics. The following is an example of configuring exporting of original flow on an S series switch (except the S1700). 1. Configure NetStream sampling on GE1/0/1, set the sampling mode to packet-based regular sampling, and set the interval to 1200. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] ip netstream sampler fix-packets 1200 inbound [HUAWEI-GigabitEthernet1/0/1] ip netstream sampler fix-packets 1200 outbound [HUAWEI-GigabitEthernet1/0/1] quit 2. Set the inactive aging time to 100 seconds and enable FIN- and RST-based aging. [HUAWEI] ip netstream timeout inactive 100 [HUAWEI] ip netstream tcp-flag enable 3. Set the source IP address of the exported packets carrying original flow statistics to 10.1.2.1, destination IP address to 10.1.2.2, and destination port number to 6000. [HUAWEI] ip netstream export source 10.1.2.1 [HUAWEI] ip netstream export host 10.1.2.2 6000 4. Set the version of exported packets to version 9. [HUAWEI] ip netstream export version 9 5. Enable NetStream flow statistics collection on GE1/0/1. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] ip netstream inbound [HUAWEI-GigabitEthernet1/0/1] ip netstream outbound [HUAWEI-GigabitEthernet1/0/1] quit [HUAWEI] quit

Which cards on an S series switch do not support MPLS
Cards' support for MPLS is as follows: - X1E series cards on switches running V200R005 and SA series cards do not support MPLS. - On a switch running V200R005, XGE interfaces connected to the ACU2 card do not support MPLS. - On a switch running V200R005, XGE interfaces connected to the ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, and ET1D2FW00S02 cards do not support MPLS. - On a switch running V200R005, XGE interfaces connected to the LE1D2FW00S01 card do not support MPLS. - On a switch running a version earlier than V200R008C00, the penultimate device cannot use the LE2D2X48SEC0 card (on the S9300 or S9300E), EH1D2X48SEC0 card (on the S9700), and ET1D2X48SEC0 card (on the S12700) to transmit MPLS services in penultimate hop popping (PHP) scenarios. - Other cards support MPLS.

Modules supported by cards on S series switches
To query modules supported by cards on S series switches, you can use Hardware Query Tool.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top