QoS configuration on an S series switch

4

For the QoS configuration on an S series switch (excluding the S1700), see "QoS Configuration Guide". You can get the document from Huawei Enterprise Product&Service Support by clicking Support > Enterprise Network > Switch > Campus Switch.

Other related questions:
How to configure priority mappings on an AR
You can configure priority mappings on an AR as follows: 1. Configure the packet priority trusted on an interface. 2. (Optional) Configure the interface priority. 3. Configure a priority mapping table.

SNMP configuration on S series switch
S series switches (except S1700 switches) support three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. SNMPv1 and SNMPv2c use community names for authentication, resulting in low security, whereas SNMPv3 uses authentication and encryption technologies to enhance security. The following uses SNMPv2c configuration as an example: [HUAWEI] snmp-agent //Enable SNMP. [HUAWEI] snmp-agent sys-info version v2c //Set the SNMP version to SNMPv2c. [HUAWEI] snmp-agent community write adminnms01 //Set the SNMP write community name. For common SNMP configuration information, see "Common SNMP Operations" in S1720&S2700&S3700&S5700&S6700&S7700&S9700 Series Switches Common Operation Guide. For typical SNMP configuration examples, see "Typical SNMP Configuration" in "Typical Network Management and Monitoring Configuration" of S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration Examples. Common configuration and typical configuration examples for S9300 and S12700 series switches are the same as those for Sx700 series switches. The Sx700 series switches are used as an example here.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top