Whether multiple S series switches can form a VRRP group

4

S600-E series switches do not support VRRP.

S series switches (S1700 excluded) support a VRRP group composed of one master and multiple backups. Typically, VRRP is configured on two devices.

Other related questions:
Whether a VRRP group can be configured on S series switches with a long distance
For S series switches (S1700 excluded), configuring VRRP devices is not restricted by the distance. Only the transmission quality has to be guaranteed.

Whether OSN 8800 devices and PTN devices can form a LAG group
No, different types of devices cannot form a LAG group.

Can S series switches interconnect with non-Huawei devices to set up a VRRP group
S600-E series switches do not support VRRP. VRRP supported by S series switches (S1700 excluded) comply with the standard protocol, so these switches can interconnect with other devices that comply with the VRRP standard protocol.

Whether S series switches support ping to the virtual IP address of the VRRP group
S series switches (S1700 excluded) allow user devices to ping a virtual IP address to serve the following purposes: - Monitors the operating status of the master in a VRRP group. Monitors communication between a user device and a network connected by a default gateway using the virtual IP address. Run the vrrp virtual-ip ping enable command to enable the ping to the virtual IP address.

Whether NAT Server of the USG6000 series can be bound with the VRRP group
NAT Server of the UGS6000 series cannot be bound with the VRRP group.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top