A user is redirected to another device using the asynchronous serial port. How does the user return to the login page

71

Press Ctrl+] to return to the login page.

Other related questions:
How does the E9000 exit serial port redirection?
To exit from SOL on the E9000 management module, perform the following operation: Press Ctrl+R on the SOL screen to return to the previous menu. You can press Ctrl+R for several times until you exit the SOL screen.

IAD serial port login method
You can use HyperTerminal or securityURT tool or putty tool, codec rate is 9600, and the parity check data is no login account and password, the password is root/huawei123, the old version may also be admin.

Can the U1900 transfer an incoming call from an external user to another external user?
1. By default, the U1900 cannot transfer an incoming call from an external user to another external user through the same trunk. 2. To enable this function, modifying the corresponding software parameter on the U1900: config softargu type 334 value 0. After software parameter 334 is modified, the U1900 can transfer an incoming call from an external user to another external user through the same trunk.

What are the user name and password used for logging in to the U1900 through the serial port?
The user name and password used for logging in to the U1900 through the serial port are the same as those used for logging in to the U1900 using Telnet and SSH. The default user name is admin and the default password is huawei123 or Chang Me based on the U1900 version.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top