Do S series switches support IGMPv3 snooping

6

S series switches support only a simplified version of IGMPv3. In this version, either (*, G) entries or (S, G) entries will be generated for a multicast group. If (*, G) entries are generated, data of all sources is received. If (S, G) entries are generated, data of a specific source is received. If the specified group address is in the SSM group address range, only source-specific programs can be ordered.

Other related questions:
How is IGMPv3 snooping proxy configured on an S series switch
For S series switches excluding the S1700, when IGMPv3 snooping proxy, perform the following configurations: 1. System view: igmp-snooping enable 2. VLAN view: igmp-snooping enable igmp-snooping version 3 igmp-snooping proxy enable The device provides IGMPv1/v2/v3 proxy.

How can I configure IGMP snooping proxy to support IGMPv3
To configure IGMP snooping proxy to support IGMPv3, perform the following configuration: 1. In the system view: igmp-snooping enable 2. In the VLAN view: igmp-snooping enable igmp-snooping version 3 igmp-snooping proxy enable The preceding configuration implements IGMP snooping proxy for IGMP v1/v2/3.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top